Essex · London and the South East
Blake End Thermal Roof Survey
Not sure what state the roof is in? We carry out thermal roof surveys in Blake End and across Essex, with plain-English findings.
- Wet areas near outlets and upstands
- Missing or slipped insulation
- Areas of a flat roof that may hold water
How a thermal roof survey works in Blake End
Wet insulation under a flat roof covering holds heat for longer than dry. That means a wet area can show up as a different temperature from the rest of the roof. It helps us see how far water may have spread under the covering, something you cannot normally tell from the surface. Moisture readings are then used to check what the camera suggests. If you’re worried about stains that keep coming back and leaks far from where the stain appears, a survey will tell you what’s going on.
In a village or hamlet like Blake End, roofs can be steep, old and hard to see from the lane. Close-up drone photos and thermal images help show what can’t be reached safely. Both the forecast and the airspace are checked first, and the journey is planned ahead of time. Steep slopes and tall chimney stacks are where a close-up view adds the most.
The report doesn’t just list problems. For each finding, it explains what it is, why it matters and what we’d recommend.

- Where
- Blake End (CM77)
- Wider area
- Essex
- Price
- From £400 inc. VAT
- Reports
- Emailed report with photos and recommendations
- Appointments
- Monday to Sunday, daytime
- Cover
- Professional indemnity and public liability
- Telephone
- 07833 053749
- Last updated
- 27 October 2026
Drones, thermal imaging and Blake End roofs
Older buildings may be listed or sit in a conservation area. Historic England’s list shows listed buildings, and the council can say whether a street is in a conservation area. Re-roofing in different materials may need permission there. If the drone is used for your survey, the flight is checked against the Drone Safety Map first.
Wherever the property is around Blake End, the approach is the same: a careful look and a clear explanation. For any home in Blake End, it is the small, early fault that is cheapest to put right.
Blake End is about 4 miles west of Braintree, in Essex. We carry out thermal roof surveys for homes and businesses in Blake End and the surrounding area. Blake End is one of the places in Essex we cover for thermal roof surveys. We also survey roofs in Chelmsford.
Postcode districts we cover here for thermal roof surveys: CM77. Neighbouring places we cover for thermal roof surveys include Watch House Green (1 mile south-west), Bannister Green (1 mile south), Felsted (2 miles south-west), Willows Green (2 miles south-east) and Causeway End (2 miles south-west). Further out, we also cover Chelmsford (10 miles south), Braintree (4 miles east), Maldon (14 miles south-east), Witham (9 miles south-east), Saffron Walden (14 miles north-west) and Halstead (8 miles north-east).
Around Blake End
Blake End’s nearest station is Braintree station, roughly 3.7 miles east of the centre. Well-known places in the area include Braintree Community Hospital (2.9 miles east) and Tudor House Museum (Braintree) (3.7 miles east). Not far away are Phyllis Currie Nature Reserve.
Also near Blake End
What else we do in Blake End
Before and after the survey
A little preparation and a few simple habits help, both for the survey and for the roof itself. Our tips:
- Note where damp appears and after what weather
- Clear a path to the loft hatch before we arrive
- Check from ground level or a window, never by climbing
- Keep the heating on as usual before a heat loss survey
Once we’ve been, the thermal images, photos and readings go into a single report. Each image is explained in plain words, alongside what we recommend. With a Premium Survey, you get the report the same day.
Keep an eye on ceilings under the roof for new stains. Early action keeps insulation from staying wet.
Your questions about thermal roof surveys in Blake End
Is Blake End in the area you cover?
Yes, Blake End is within the area we cover. Our area covers London and South East England. Just call 07833 053749 or send us an email and tell us about the property.
Does a conservation area affect roof work in Blake End?
Your council is the best source, with Historic England’s list for listed buildings. Both listing and conservation areas can limit changes of roofing material.
Can you inspect my roof with a drone?
Where it helps and it is safe, yes. Flights depend on the weather on the day and airspace rules, including flight restriction zones near airports. We are a CAA-registered drone operator.
Can you check my loft insulation with a thermal camera?
The camera can point to heat loss and gaps in insulation. The survey is not an energy rating or a heat loss calculation, but the images show where improvements may help.
Will you go up on the roof?
Only if it is safe. We inspect everything that’s safely in view: from the ground, from windows, from inside the loft space, from the roof where it’s safe and by drone where it applies. Anything we can’t see is noted in the report.
Are you insured?
Our surveys are covered by professional indemnity and public liability insurance. If you need details for a managing agent or a building owner, just ask.
What’s the best way to book?
Simply ring 07833 053749 or email us with the address. After a few questions, we confirm the price and fix a day.
What a thermal roof survey does not cover
In fairness, there are limits to any roof survey:
- Hidden layers that need to be opened up to check
- An energy rating for the building
- Clear results when the conditions on the day are poor
Not sure which survey suits your roof? You can call 07833 053749 or drop us an email and we will tell you before you book. The full list of what we check.
What we check
- Loft conversions
- Ceilings below the roof
- Flat roofs
- Insulated roof spaces
- Commercial roofs
- Pitched roof slopes
DIY checks: what’s safe
After strong wind, take a look from the pavement or garden: pieces of tile or slate on the ground, a gap in the ridge or a lifted flashing are all worth noting. Leave anything above ground level to a survey.
Inside, the loft is a good place to look, with care. Use a torch and stay on the joists or boards, and look for staining, damp timber or daylight coming through.
Landlord and commercial surveys in Blake End
Surveys can also be booked by buyers’ agents acting for a client. The report is emailed, so it can go straight to your client, photos included.
Where a roof is shared: access has to be agreed with whoever owns or manages the building. Mention it when you get in touch and we will plan the visit with that in mind.
How the survey works
Before we start, tell us why you’ve booked: buying, a leak, storm damage, new work or just wanting to know where things stand. It helps us focus on what matters most to you. The visit usually takes an hour or two at a typical home, while a commercial roof takes nearer three to four hours. Rural addresses near Blake End can be hard to find from a postcode alone, so a few directions, or a note of a nearby landmark, help us arrive on time. After that, the survey runs as it would anywhere.
- We start with the roof, its history and any signs of damp or heat loss.
- We check the conditions and note how they may affect the images.
- A full inspection and thermal imaging are carried out together.
- Moisture readings are used to check what the camera shows.
- You get the report the same day, with an in-person consultation to follow.
Getting ready for the survey
- Clear the way to the loft hatch
- Show us where any leaks or stains appear
- Unlock side gates and any roof access doors
Arrange a survey
We confirm the price for your survey before booking, so you know the cost up front. Our price is from £400, including VAT. To book, phone 07833 053749 or send us an email.
Advice
How the survey changes by roof type
GRP fibreglass roofs
Glossy GRP can reflect heat. We allow for reflections and confirm findings with moisture readings.
Felt and asphalt flat roofs
Felt and asphalt sit tight to the layers below, which often helps the camera pick up differences. We confirm any patterns with moisture readings.