Essex · London and the South East
Thermal Roof Survey in Brookstreet
Thermal roof surveys around Brookstreet, with a written report you can act on. Book a weekday or weekend visit.
- Water that travels before it shows
- Damp around roof outlets and upstands
- Possible trapped moisture under a flat roof covering
Thermal roof surveys around Brookstreet
What can be done to an older roof may depend on listing or a conservation area. Your council and Historic England’s list will tell you where you stand. In Essex, older buildings are often clay-tiled, many with weatherboarding, while many towns grew with post-war and newer estates. Where a roof is steep, tall or hard to see from ground level, drone photos and thermal images add detail.
For site and facilities teams at buildings such as The Flitch Green Academy, a view from above covers a wide roof far faster than walking it. If your house is among the older ones in the streets near Church of St Mary the Virgin, older roofs can be steep and hard to see from the street, which is where aerial photos and thermal images help.
Brookstreet is about 7 miles west of Braintree, in Essex. Brookstreet gets the same service as everywhere else we work: a proper look at whatever is safely visible, photographs and a clear written report. Across Essex, we cover Brookstreet. You can also see our page for Chelmsford.
We cover every part of the CM6 postcode area for thermal roof surveys. Neighbouring places we cover for thermal roof surveys include Little Dunmow (1 mile east), Felsted (1 mile east), North End (1 mile south), Causeway End (2 miles south-east) and Watch House Green (2 miles east). Further out, we also cover Chelmsford (9 miles south), Braintree (7 miles east), Harlow (14 miles south-west), Maldon (15 miles south-east), Witham (11 miles south-east) and Saffron Walden (13 miles north-west).
Landmarks near Brookstreet
In Brookstreet, that means homes and buildings near Flitch Of Bacon Public House, among other places. A little further out are Little Easton Moat (3.6 miles north-west) and Braintree Community Hospital (5.8 miles east). For a walk, there’s Phyllis Currie Nature Reserve.
How a thermal roof survey works in Brookstreet
A thermal imaging roof survey uses a thermal camera to show differences in surface temperature across a roof. The patterns can suggest wet insulation, gaps in insulation or places where heat is getting out. The camera does not see water itself, so we check what it shows with moisture readings. It comes as part of our Premium Survey, from £400. Conditions on the day affect the results, and the report explains how. Typical surveys look at damp around chimneys and parapets and cold spots on ceilings under the roof, across pitched roof slopes, ceilings below the roof and flat roofs.
In a village or hamlet like Brookstreet, roofs can be steep, old and hard to see from the lane. A drone and a thermal camera each give a view you cannot get from the ground. Both the forecast and the airspace are checked first. Steep slopes and tall chimney stacks are where a close-up view adds the most.
Findings are set out part by part, from the coverings down to the gutters. It records what’s sound as well as what is not.
- Place
- Brookstreet (CM6)
- Region
- Essex
- Price
- From £400 inc. VAT
- Report
- Emailed report with photos and recommendations
- When we survey
- Weekdays, Saturdays and Sundays
- Insurance
- PI and public liability insurance
- Telephone
- 07833 053749
- Page updated
- 27 October 2026
Prices for thermal roof surveys in Brookstreet
Survey packages start from £150, inc. VAT. What you pay for your roof depends on:
- Chimneys, valleys, parapets and other details
- The number of roofs, including extensions and garages
- Whether it’s a home or a commercial building
- Building height and the viewpoints available
Thermal imaging and drone inspection (where applicable) come with the Premium Survey, from £400 with VAT included. We can help you choose the package that fits what you need to know.
Helping us price your survey
To price your survey accurately, we will ask about:
- Any marks or damp showing indoors
- The kind of building and roof involved
- Anything about access we should know
- The reason for the survey, such as buying, a leak or storm damage
We survey roofs seven days a week. To arrange a day that suits you, phone 07833 053749 or drop us an email.
Towns and villages near Brookstreet
More services for Brookstreet
DIY checks: what’s safe
After strong wind, take a look from the pavement or garden: pieces of tile or slate on the ground, a gap in the ridge or a lifted flashing are all worth noting. Don’t go up yourself.
A lot can be seen from the ground. Binoculars help you spot slipped slates or tiles, gaps along the ridge and a leaning stack. Never climb onto the roof to look.
What we do, step by step
When we arrive, we start by asking what you’ve noticed and what you’d like to know. We then inspect everything that can safely be seen. Most surveys take roughly 1–2 hours at a typical home, and more on a big or complicated roof. Somewhere as small as Brookstreet, access is often the only tricky part. Mention any outbuildings, barns or garages you want included, and anything about the roof you already know. Weekday and weekend visits are available.
- First we discuss the roof, any damp and the forecast for the visit.
- We look over the roof from wherever it is safe.
- Thermal images are taken across the roof and, where there’s safe access, in the loft.
- Patterns that stand out are checked with moisture readings.
- Each image is set beside a normal photo and explained in the report.
Getting ready for the survey
- For flats, check roof access has been agreed
- Let us know where we can park nearby
- Have any paperwork from past roof work to hand
Book a survey
Not sure which survey you need? The easiest way is to phone 07833 053749 or send us an email and describe the roof and why you want it surveyed. We will talk you through the options and what they cost.
Related advice
Surveys for landlords and agents in Brookstreet
If the property is let, the agent or a tenant can let us in, at a time agreed beforehand. Surveys run on weekdays, Saturdays and Sundays, which can make access easier.
Freeholders and residents’ companies use a roof report to plan and budget, putting the urgent items at the top.
Honest limits
Our findings are based on what we can see safely on the day, so some things are outside what a survey can do:
- Structural calculations, which need a structural engineer
- A formal energy assessment
- Reliable images in rain, strong wind or on a wet roof surface
If in doubt, ring 07833 053749 or send us an email and we’ll suggest the right survey. The full list of what we check.
What we look at
- Ceilings below the roof
- Commercial roofs
- Pitched roof slopes
- Insulated roof spaces
- Flat roofs
- Loft conversions
Brookstreet questions
Is Brookstreet in the area you cover?
Yes, Brookstreet is within the area we cover. We survey roofs across London and South East England. Just ring 07833 053749 or send us an email and let us know about the property.
Is Brookstreet within the area you cover?
Yes, smaller places are covered as well as towns. We cover the whole of London and South East England. Just mention lanes, gates or anything else about the route as you book.
How soon will I get the report?
Basic reports arrive within 48 hours, Standard reports in 24–48 hours and Premium reports on the same day. Each one is emailed.
How long have you been surveying roofs?
More than 5,000 surveys over 20+ years.
Can a thermal survey trace a roof leak?
It frequently helps show where to look. Water can travel under a covering before it shows inside, and temperature patterns can help follow it. It is used alongside a close inspection and moisture readings because the camera can’t confirm water on its own.
What does a thermal roof survey show?
It records surface temperature across the roof. Unusual patterns can point to trapped water, gaps in insulation or heat escaping, and we check them with moisture readings.
Is thermal imaging useful on pitched roofs?
It can be useful, though pitched roofs are usually harder to read. Slates and tiles over a ventilated space can mask what’s below, so we combine it with an inspection from the loft where there is safe access.
Different roofs, different checks
Pitched slate and tile roofs
Thermal images of a pitched roof can still show heat loss patterns and some damp areas. The report explains what the images can tell you and what they can’t.
Felt and asphalt flat roofs
These coverings sit directly on the layers beneath, so temperature differences often show through. We confirm any patterns with moisture readings.