Hampshire · London and the South East
Milford on Sea Electronic Leak Detection
Electronic leak detection in Milford on Sea from an independent, experienced roof surveyor. Over 5,000 surveys and 20+ years behind us.
- Damp inside with no sign on the roof
- New roofs to check before paving or planting
- Damage from equipment installers
Before and after the survey
Getting the most from electronic leak detection starts before we arrive and carries on afterwards. Tips:
- Test new membranes before covering them
- Share any drawings of the roof
- Do not leave water getting in
- Avoid repeated repairs without finding the cause
If anything in the report is not clear, ask us. We will explain what was found and what it means.
Limit foot traffic on flat roofs. Many breaches come from foot traffic.
Electronic leak detection in Milford on Sea
Green roofs, ballasted roofs and roofs under paving are harder to test. What sits on the membrane can affect which method will work and parts may need to be lifted. We talk this through before we quote. Any details of the build-up help because they show what’s under the surface. If testing is not possible, we’ll say so. Typical surveys look at leaks through a flat roof with no obvious cause and leaks showing away from the breach, across flat roof membranes, green roofs and roof terraces and balconies.
In smaller places like Milford on Sea, flat roofs are mostly on extensions, garages, porches and dormers. They’re small, but a leak over a kitchen extension can do a lot of harm. Knowing the covering and how it was laid tells you what to expect from it, from felt and asphalt to EPDM rubber and GRP. From an upstairs window, look for standing water, splits and edges coming away.
Nothing in the report is left vague: if work is needed, the report says so clearly, and where it can wait, that’s said too.
- Location
- Milford on Sea (SO41)
- Region
- Hampshire
- Cost
- Quoted for your roof
- Reports
- A written report with photos, by email
- Appointments
- Weekdays, Saturdays and Sundays
- Cover
- PI and public liability insurance
- Phone
- 07833 053749
- Last updated
- 27 October 2026
FAQs for Milford on Sea
Does being near the coast affect roofs in Milford on Sea?
Often, yes. Within about 1 mile of the sea, as Milford on Sea is, metal fixings wear faster and gales find any loose ridge or slate.
Is Milford on Sea within the area you cover?
Yes, Milford on Sea is covered. Our area covers London and the South East, from towns to the smallest villages. Longer journeys are simply planned beforehand.
How do I book a survey in Milford on Sea?
To book, ring 07833 053749 or use the contact form and tell us the address and what you want to find out. We will confirm the price and agree a day with you.
How fast do I get the report?
That depends on the survey you book: the Basic Survey report arrives within 48 hours, the Standard Survey in 24 to 48 hours and the Premium Survey the same day. Reports are sent by email.
Does ELD work under paving or planting?
It can be possible, depending on the roof. Covered roofs limit the methods we can use, so we check the build-up first.
Can you inspect my roof with a drone?
Yes, where it is applicable. Flights depend on the weather on the day and airspace rules, and we check for restrictions near airports before flying. We’re a CAA-registered drone operator.
Can you survey at the weekend?
Surveys run on weekdays, Saturdays and Sundays. To find a day that suits you, phone 07833 053749 or send us an email.
What you can safely check yourself
Fresh stains on ceilings or walls after rain are worth noting. Photograph them and note the date.
The one thing to avoid is getting up close. Roofs are fragile and slippery. That part is for a survey.
What a survey costs
What a survey costs depends on the time and equipment it needs. That comes down to:
- Extensions, dormers and garages with roofs of their own
- The size of the roof
- Whether it’s a home or a commercial building
- If the survey needs thermal imaging or a drone
To find out what your survey will cost, ring 07833 053749 or drop us an email with the address and a few details. We will confirm the figure before booking.
Helping us price your survey
We will normally ask about:
- Your postcode, so we can check access and travel
- Any marks or damp showing indoors
- Any photos you have, taken from the ground or a window
- Dates you are working to, such as exchange
To get a price for electronic leak detection in Milford on Sea, phone 07833 053749 or email us. A few details about the property and the roof help us price the survey accurately.
What we can’t see
Our survey isn’t a RICS Level 2 or Level 3 survey, a structural engineer’s report or an asbestos survey. Other limits to bear in mind:
- Parts of the roof covered by fixed equipment
- Roofs whose membrane or build-up isn’t suitable
- Moisture spread under the membrane
If in doubt, phone 07833 053749 or send us an email and we will point you to the right survey before booking. What our survey covers.
What this survey covers
- Commercial flat roofs
- Liquid-applied waterproofing
- Flat roof membranes
- Roof terraces and balconies
- Single-ply roofs
- Green roofs
Electronic leak detection in Milford on Sea: local notes
The coast is about 1 mile or less from Milford on Sea, so there is more wind and more salt in the air than further inland. Coastal wind works at the edges of flat roofs, and salt air wears metal trims and fixings. A number of Hampshire villages keep thatched roofs on their older buildings. Across the South East, older homes tend to have slate or clay tiles, and many later ones concrete tiles. Flat roofs on extensions, dormers, garages and business units are found alongside them almost everywhere.
Anyone responsible for a site like Milford-on-Sea Church of England Primary School will know that ponding and blocked outlets on a wide flat roof are worth catching before the next wet season. For landlords with property near Lymington Town station, the flat roof over a let home is worth a look before it becomes a tenant complaint. If you own one of the older houses in the streets near Church of All Saints, the joins between later flat roofs and the old walls are where problems typically start.
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. Bookings from Milford on Sea are handled just like any other: a call or an email, a price, then a date. Milford on Sea is one of the places in Hampshire we cover for electronic leak detection. Our Southampton page covers surveys nearby.
Surveys in SO41 work the same way as everywhere else we cover. We cover properties on High Street, Love Lane and Greenbanks Close and the roads around them. We also cover the places around Milford on Sea: Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). Within a short drive, we also cover Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
What’s near Milford on Sea
We work in homes and buildings around The Red Lion Public House and Priestlands School. The nearest railway station is Lymington Town station, roughly 3.4 miles north-east of the centre. Nearby you’ll also find Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). For a walk, there is Milford on Sea LNR and Tennyson Down.
Why it is worth a survey now in Milford on Sea
Testing a new membrane before it’s covered is easier than tracing a leak later. Once layers are added, finding a breach is harder. Arranging work in a smaller place like Milford on Sea is easier with notice than in an emergency. A survey gives you that notice.
All our prices include VAT. Electronic leak detection is quoted for your roof, because the method depends on the roof. You’ll know the price for your roof before booking.
Why book with us
- Surveys seven days a week
- Every finding written up with photos
- 5,000+ surveys completed
- CAA-registered drone operator (Flyer ID and Operator ID)
Read what a roof survey costs and our case studies.
The survey, step by step
Photos are taken throughout the visit, so you can see in the report what we found and where. Close-ups come from the safest viewpoint available, including by drone where it’s applicable and the weather allows. A typical visit takes longer on a large roof than a small one, and the build-up of the roof makes a difference too. A visit to a smaller place like Milford on Sea is no different on the day: outside, inside and from any safe vantage point, in that order. Point out any stains, cracks or loose pieces you’ve spotted.
- We ask about the roof, its age, its membrane and where leaks appear inside.
- The roof is assessed to see if electronic testing will work on it.
- The testing method is chosen to suit the membrane and build-up.
- Testing runs across the roof to locate breaches in the membrane.
- You get a report showing where each breach is, for your roofer to repair.
How to prepare
- Have any questions written down, so nothing gets missed
- Note where any stains or damp appear
- For flats, check roof access has been agreed
Getting a price
Every survey is priced before it is booked, so you know the cost up front. Electronic leak detection is quoted for your roof, because the method depends on the roof. For a price for your roof, ring 07833 053749 or send us an email.