Isle of Wight · London and the South East
Thermal Roof Survey in Binstead
Thermal roof surveys around Binstead, with findings in writing and pictures to back them up. Weekday and weekend visits available.
- Cold spots on ceilings under the roof
- Missing or slipped insulation
- Damp where roofs meet walls and chimneys
About our thermal roof survey in Binstead
Your report sets out the thermal images alongside ordinary photos, so it is easy to see which part of the roof each one shows. Each one comes with an explanation, the moisture readings and our recommendation. With a Premium Survey, the report reaches you the same day. You can talk the findings through with us at the in-person consultation. A follow-up 12 months later is included too. Typical surveys look at missing or slipped insulation and leaks far from where the stain appears, across commercial roofs, insulated roof spaces and loft conversions.
Places like Binstead can be near small airfields or other airspace restrictions, so the Drone Safety Map is checked before any flight. Open ground can mean stronger wind, which also affects whether a small drone can fly, while thermal imaging also works best with little wind. Each flight is planned with neighbours’ privacy in mind, as well as the airspace and the wind.
Every survey ends with a written report, with photos, sent by email. It sets out the condition of the roof, any defects and our written recommendations.
- Location
- Binstead (PO33)
- Wider area
- Isle of Wight
- Price
- From £400 inc. VAT
- Reports
- Written, with photos, emailed to you
- Appointments
- Weekdays and weekends
- Insured
- PI and public liability insurance
- Telephone
- 07833 053749
- Updated
- 27 October 2026
Tips that help
Over many surveys, some simple habits stand out as worth the effort:
- Keep a record of when stains appear
- Clear leaves from outlets and gutters each autumn
- Photograph damp patches with the date
- File the images with your roof records
Where a pattern cannot be confirmed, the report says what could help, such as electronic leak detection or opening up a small area.
Check that loft insulation is laid evenly and hasn’t been pushed aside. Gaps often appear after work in the loft.
Roof by roof
Single-ply and EPDM roofs
Thin membranes can show patterns from the layers beneath. Shiny surfaces can reflect heat, so we take care reading the images.
Parapets, valleys and junctions
Parapet and valley gutters can overflow inside a building. Thermal images, checked with moisture readings, can help trace it.
Prices for thermal roof surveys in Binstead
Survey packages start from £150, with VAT included. The price for your roof depends on:
- Any need for thermal images or a drone flight
- The type of building, from a house to a block or an office
- Chimneys, valleys, parapets and other details
- The height of the building and how the roof can be seen safely
Thermal roof survey starts from £400, including VAT. What you pay depends on how big and how high the roof is, how it can be seen safely and the package you choose.
Getting in touch
Before you get in touch, it helps to have:
- Photos of the roof, taken safely from ground level or a window
- What’s prompted the survey
- Access details, such as a loft hatch or a shared roof
- Your timetable, such as an exchange date
Surveys can be booked for weekdays, Saturdays or Sundays. To find a date that works for you, ring 07833 053749 or send us an email with the address and the days you’d prefer.
Airspace, weather and Binstead roofs
Binstead is within about 2 miles of the coast. Calm, dry conditions after a sunny day suit thermal imaging best, so the visit is planned around the forecast. Thatch survives on some older Isle of Wight buildings, and nowhere on the island is far from the sea. Many roofs like these can’t be judged properly from the pavement, and that’s where a view from above or a thermal image earns its place.
If you live in an older home near Holy Cross Church, older roofs can be steep and hard to see from the street, which is where photos from the air and thermal images help. With Nunwell House about 3.3 miles south-east, the area around Binstead has a long history. Older roofs nearby can be steep and hard to see from the ground, and a survey by drone or thermal camera does not touch the roof itself. For site and facilities teams at buildings like Binstead Primary School, big roofs are where aerial photos and thermal images show the most at once.
Binstead is about 1 mile west of Ryde, in the Isle of Wight. We survey roofs in Binstead across London and South East England. Our area takes in places right across the Isle of Wight, large and small. For surveys nearby, see our Portsmouth page.
Postcode districts we cover here for thermal roof surveys: PO33. We cover properties on Pitts Lane, Quarr Road and Church Road. If you are just outside Binstead, we cover Haylands (1 mile south-east), Ryde (1 mile east), Upton (1 mile south), Oakfield (1 mile east) and Elmfield (2 miles east). Further out, we also cover Newport (5 miles west), Cowes (6 miles west), Sandown (5 miles south), Shanklin (7 miles south), Ventnor (9 miles south) and East Cowes (5 miles north-west). For harder-to-reach addresses, the survey takes a little more planning, so let us know when you get in touch.
What’s near Binstead
In Binstead, that means homes and buildings near The Binstead Arms, Ryde Academy and Ryde School with Upper Chine. The nearest railway station is Ryde Esplanade station, roughly 1.3 miles east of the centre. Well-known places in the area include Gosport War Memorial Hospital (4.9 miles north) and East Cowes Castle (4.7 miles north-west). The countryside around Binstead includes Briddlesford Nature Reserve and Brading Down.
Binstead questions
Do you carry out roof surveys in Binstead?
Yes, Binstead is one of the places we work. The survey and report are the same in Binstead as anywhere else.
Is my home in Binstead listed or in a conservation area?
Your council is the best source, with Historic England’s list for listed buildings. Both listing and conservation areas can limit changes of roofing material, and councils can also use Article 4 directions.
Is thermal imaging good for finding leaks?
It is a useful tool for tracing leaks, but not the only one. What it shows depends on the weather and the roof. Where it cannot be pinned down, the report suggests a next step, like electronic leak detection.
Is it the same as a RICS Level 2 or Level 3 survey?
No. We are experienced roof surveyors, and our survey covers the roof rather than the whole building. If you need a full building survey, you will need a RICS survey as well.
Can you inspect my roof with a drone?
Yes, where it applies and safe. We are a CAA-registered drone operator (Flyer ID and Operator ID), flying a sub-250g drone. Drone inspection is part of the Drone Roof Survey and the Premium Survey, where it applies.
Are you structural engineers?
No. Our survey is not a structural engineer’s report. We will recommend an engineer if we see signs that call for one.
Can you survey a shared roof?
Yes, once access has been agreed. Roofs over flats are often shared, so we need permission from whoever owns or manages the building. We can only inspect what we’re given access to.
Why it is worth a survey now in Binstead
Heat lost through a roof costs money every winter. The camera can point to gaps and thin areas in the insulation, so you know where to put things right. On a bungalow or cottage around Binstead, the roof sits close to the rooms below, so a small leak can mark a ceiling within a few storms. Finding the cause first saves a second job inside.
A Basic Survey starts from £150, inc. VAT. The Standard Survey starts from £250 and the Premium Survey from £400, both with VAT included. We confirm the exact price before you book.
Why choose Independent Roof Survey in Binstead
- 5,000+ surveys completed
- Thermal imaging and drones used where they help
- More than 20 years surveying roofs
- We hold a CAA Flyer ID and Operator ID
See what a roof survey costs and two real surveys.
Other services in Binstead
How it works
On the day, we begin with a quick chat about the roof and anything that is worrying you. After that, we look at everything we can see safely. The survey normally takes between one and two hours at a typical home; commercial roofs usually need 3–4 hours. A visit to Binstead is planned like any other: the time, the access and where to park are agreed ahead of time. Weekday and weekend visits are both possible. If there are outbuildings or garages you want looked at, mention them.
- We start with the roof, its history and any signs of damp or heat loss.
- We check the conditions and note how they may affect the images.
- A full inspection and thermal imaging are carried out together.
- We back up the thermal patterns with moisture readings.
- The Premium report reaches you the same day, and we go through it with you in person.
Preparing for the visit
- Move anything stored under the loft hatch
- If the roof is shared, arrange access with whoever manages the building
- Dig out any old roof reports or invoices
Booking a survey
You can call us seven days a week. For a price or to book, phone 07833 053749 or use the contact form.
Read more
What this survey can’t tell you
This is not a RICS building survey, a structural engineer’s report or an asbestos survey. Other limits to bear in mind:
- Readings unaffected by sun, shade or reflections
- Insulation values or heat loss calculations
- Hidden layers that need to be opened up to check
If in doubt, call 07833 053749 or use the contact form and we will suggest the right survey before you book. The full list of what we check.
What this survey covers
- Flat roofs
- Commercial roofs
- Insulated roof spaces
- Loft conversions
- Ceilings below the roof
- Pitched roof slopes