Kent · London and the South East
Thermal imaging roof survey in Peene, Kent
Thermal imaging to find moisture and heat loss patterns in a roof for Peene, from an experienced roof surveyor. Every survey comes with a written report and photos.
- Moisture around outlets and upstands
- Damp patches with no obvious cause
- Leaks far from where the stain appears
About our thermal roof survey in Peene
Flat roofs over extensions, garages, flats and commercial buildings are where thermal imaging often helps most. It can show patterns that point to trapped moisture under the membrane. On pitched roofs, slates and tiles over a ventilated space can hide what’s below, so we combine the camera with an inspection from the loft where there’s safe access. We survey pitched roof slopes, ceilings below the roof and flat roofs, and common reasons people get in touch are cold spots on ceilings under the roof and damp where roofs meet walls and chimneys.
In a small place like Peene, open ground can mean strong wind. A small drone can’t fly safely in high wind or heavy rain, and thermal imaging works best with little wind. The visit is planned around the forecast, along with the journey and access. A change in the forecast can mean moving the visit to another day.
Most points in the report come with a picture, because a photo of a cracked flashing says more than a paragraph. If something couldn’t be seen safely, the report is clear about it.
- Place
- Peene (CT18)
- Wider area
- Kent
- Price
- From £400 inc. VAT
- Reports
- Written, with photos, emailed to you
- When we survey
- Weekdays and weekends
- Insured
- Professional indemnity and public liability
- Telephone
- 07833 053749
- Page updated
- 27 October 2026
Roof by roof
Single-ply and EPDM roofs
Single-ply PVC, TPO and EPDM roofs are frequently laid over insulation boards. If water gets under them, thermal imaging can suggest which boards are wet.
GRP fibreglass roofs
GRP roofs are laid over timber boards, so trapped moisture can affect the deck. The camera can help show where to look.
Nearby places to Peene
Other services in Peene
Questions from Peene
Does a conservation area affect roof work in Peene?
We cannot confirm that for you, but Historic England’s list and your council can. Both listing and conservation areas can limit changes of roofing material.
Is Peene in the area you cover?
We do. The survey and report are the same in Peene as anywhere else, and visits run on weekdays and weekends.
Can you give me structural calculations?
No. We’re roof surveyors, not structural engineers. We will recommend an engineer if we see signs that call for one.
Does the weather affect a thermal survey?
Conditions on the day affect the results. It works best after a sunny day, with a dry roof surface and little wind. Rain and strong wind can make the images less clear, so we talk through the forecast when booking.
Does this replace a RICS home survey?
No. Our survey is a roof survey, not a RICS Level 2 or Level 3 survey of the whole building. It focuses on the roof, so it sits alongside a building survey rather than replacing it.
How soon will I get the report?
It depends on the package: the Basic Survey report arrives within 48 hours, the Standard Survey in 24 to 48 hours and the Premium Survey the same day. Reports are sent by email.
Can you use a thermal camera on a sloping roof?
It can be useful, though pitched roofs are usually harder to read. Slates and tiles over a ventilated space can mask what’s below, so we combine it with an inspection from the loft where there is safe access.
What we cannot see
In fairness, a roof survey has limits:
- The condition of timbers we cannot see
- Confirming water without moisture readings
- Structural calculations, which need a structural engineer
If you’re not sure which survey you need, call 07833 053749 or email us and we will give you a straight answer. The full list of what we check.
Roof types and parts we check
- Commercial roofs
- Pitched roof slopes
- Flat roofs
- Ceilings below the roof
- Insulated roof spaces
- Loft conversions
Useful tips for Peene property owners
Small things make a difference, both for the survey and for the roof itself. Our tips:
- Photograph damp patches with the date
- Heat the home normally on the days before
- Make sure the loft can be reached safely
- File the images with your roof records
Buyers can use the findings when talking to the seller or agent. What you do with it is up to you, whether that is asking for work or discussing the price.
Deal with small splits and lifted seams promptly. Once water gets under a membrane, it can travel far before it appears inside.
Drones, thermal imaging and Peene roofs
Peene lies within about 2 miles of the sea. Calm, dry conditions after a sunny day suit thermal imaging best, so the visit is planned around the forecast. Many older homes in Kent have handmade clay tiles, including Kent peg tiles held by pegs through two holes, and tile-hanging on their upper walls. Oast houses and timber-framed Wealden hall houses are part of the county’s older buildings too. Older coverings on steep or tall roofs are hard to judge from below, so close-up photos from the air and thermal images help.
Historic houses such as Acrise Place, about 2.7 miles north, show how far back building around Peene goes. Photos from the air and thermal images let an old roof be checked without anyone disturbing it. Take a building like Cheriton Primary School: a drone or thermal camera can show a large roof in a single visit. Take an older house close to Church of St Nicholas: older roofs can be steep and hard to see from the street, which is where aerial photos and thermal images help.
Peene is about 2 miles north-west of Folkestone, in Kent. We cover Peene and the rest of Kent. Our area takes in places right across Kent, large and small. Our Canterbury page covers surveys nearby.
Every address in CT18 is covered for thermal roof surveys. Other places close to Peene include Newington (1 mile south-west), Arpinge (1 mile north-east), Cheriton (1 mile south-east), Etchinghill (1 mile north-west) and Seabrook (2 miles south). Further out, we also cover Ashford (11 miles west), Canterbury (13 miles north), Dover (8 miles east), Deal (14 miles north-east), Hythe (3 miles south-west) and Tower Hamlets (8 miles east).
Landmarks near Peene
The closest station to Peene is Folkestone West station, about 1.8 miles south-east of the centre. Nearby you’ll also find Elham Valley Countryside Centre And Railway Museum (less than half a mile west) and Folkestone Castle (1.8 miles east). The countryside around Peene includes Cheriton Hill.
Checking the roof from the ground
You can learn a lot from the ground. With binoculars, look for slipped or missing slates and tiles, gaps along the ridge and leaning chimneys. Never climb onto the roof to look.
What you cannot do safely is get up close. Slates, tiles, flat roofs and rooflights can give way, and falls from height are serious. That’s where a survey comes in, using safe viewpoints and a drone where it applies.
Prices for thermal roof surveys in Peene
A few things affect what a survey costs:
- The roof’s overall size
- The use of thermal imaging or a drone
- The package you choose: Basic, Standard or Premium
- How tall the building is and how easy the roof is to see
Prices start from £400, including VAT. Basic starts from £150, Standard from £250 and Premium from £400, VAT included, and we will tell you which fits.
Booking your survey
Before you get in touch, it’s useful to have:
- Where any leaks, stains or damp patches show inside
- The property’s address and postcode
- The style of property, from a terrace to a block
- Pictures from the garden or a window, if you have them
Most bookings start with a short call: call 07833 053749 or use the contact form and we’ll ask a few questions about the roof. You will have a price before anything is arranged.
What we do, step by step
Once we’ve finished looking, we write up our findings as a written report with photos. As for time on site, it usually takes an hour or two at a house, including the thermal images, and around 3–4 hours for a commercial roof. Older rural homes like those around Peene can have a main roof, lower lean-to roofs and outbuildings all joined together. Each part is looked at from wherever it can safely be seen.
- We start with the roof, its history and any signs of damp or heat loss.
- We check the conditions and note how they may affect the images.
- We inspect the roof and take thermal images during the same visit.
- We back up the thermal patterns with moisture readings.
- The Premium report reaches you the same day, and we go through it with you in person.
Getting ready for the survey
- If you’re buying, check with the agent that we can get in
- Keep pets out of the way during the survey
- Find any records of previous roof work
Book a survey
Once you know what you need, phone 07833 053749 or drop us an email. We will suggest a package, agree the price and find a date, weekday or weekend.