Reading · London and the South East
Thermal Roof Survey in Tilehurst Within
An experienced roof surveyor for thermal roof surveys in Tilehurst Within. Over 5,000 surveys and 20+ years behind us across London and the South East.
- Damp around chimneys and parapets
- Areas of a flat roof that may hold water
- Leaks that are hard to trace
About our thermal roof survey in Tilehurst Within
Flat roofs over extensions, garages, flats and commercial buildings are where thermal imaging frequently helps most. It can show patterns that point to trapped moisture under the membrane. Pitched roofs with slates or tiles are often harder to read, because of the air space beneath, so we also look from the loft where we can reach it safely. We survey pitched roof slopes, commercial roofs and flat roofs, and common reasons people get in touch are thin or uneven insulation in the roof and stains that keep coming back.
Older cottages and houses around Tilehurst Within may have little insulation, and some have extensions with their own roofs. Thermal patterns and close-up photos together give a fuller picture of the roof. Anything that looks like moisture is checked with a meter. Calm, dry weather suits both methods, so the date is set with the forecast in mind.
We write the report in plain English, so you do not need to be a roofer to follow it. Each point is backed by a photo where possible, and recommendations are put by urgency where it matters.
- Where
- Tilehurst Within (RG30, RG31)
- Region
- Reading
- Price
- From £400 inc. VAT
- Reports
- Emailed report with photos and recommendations
- Appointments
- Monday to Sunday, daytime
- Insured
- Professional indemnity and public liability
- Phone
- 07833 053749
- Updated
- 27 October 2026

What happens if roof problems are left?
A damp patch that keeps coming back normally has a cause that hasn’t been found. Combining the camera with moisture readings can help find it, instead of trying repair after repair. In an older home around Tilehurst Within, water from a roof defect can get into timber and plaster, which is far harder to put right than the roof fault itself.
Simple, low roofs take less time to survey than tall or complicated ones, and the package you pick makes a difference too. We will give you the figure before anything is booked.
Why book us in Tilehurst Within
- 5,000+ roofs surveyed
- 98% of clients satisfied
- Every finding written up with photos
- Clear package prices, inc. VAT
What a survey costs
When we price a survey, we consider:
- The roof’s overall size
- Chimneys, valleys, parapets and other details
- The use of thermal imaging or a drone
- Which survey package you book
All our prices include VAT. Our price is from £400, including VAT. We confirm the price for your roof before booking.
Getting in touch
There is no need for technical words. It’s enough to tell us:
- What made you get in touch
- Any stains, drips or damp patches you’ve seen indoors
- The type of building and roof, like pitched or flat
- Photos of the roof, taken safely from ground level or a window
To book a survey, call 07833 053749 or send us an email and let us know the address and what’s prompted the survey. We’ll confirm the price before booking.
Places near Tilehurst Within
More services for Tilehurst Within
DIY checks: what’s safe
Look up at the roof after a storm, from ground level: pieces of tile or slate on the ground, a gap in the ridge or a lifted flashing are all worth noting. Do not go up yourself.
It helps to keep a record: when leaks happen, ground-level photos and any past roof work. Share it with us when booking.
What happens on the day
Photos are taken throughout the visit, so you can see in the report what we found and where. Close-ups come from the safest viewpoint available, including by drone where it’s applicable and the weather allows. A typical visit takes an hour or two for most homes, plus time to check any thermal findings with moisture readings. Parking around Tilehurst Within is normally easier than in a town centre, but mention lanes, gates or long drives. Low roofs on bungalows can frequently be seen well from ground level, and the loft shows the rest.
- You tell us about the roof and any damp, leaks or cold rooms.
- We check the conditions and note how they may affect the images.
- We inspect the roof and take thermal images during the same visit.
- Moisture readings are used to check what the camera shows.
- The Premium report reaches you the same day, and we go through it with you in person.
Before we arrive
- Make a note of anything you’d like us to look at
- Leave side gates unlocked
- For flats, make sure roof access has been agreed
Getting a price
Surveys can be booked for weekdays, Saturdays or Sundays. To arrange a day that suits you, phone 07833 053749 or send us an email.
Read more
Airspace, weather and Tilehurst Within roofs
Mapledurham House, about 2 miles north, is one of the historic houses in the wider area around Tilehurst Within. If your home is one of the older ones, expect a mix of original materials and later repairs on the roof, and any change of roofing material on a listed home needs checking with the council first. If the drone is used for your survey, the flight is checked against the Drone Safety Map first.
Take a building like Moorlands Primary School: big roofs are where photos from the air and thermal images show the most at once. If you run a business near Broad Street Mall, thermal images can show trapped moisture across a wide commercial roof.
Tilehurst Within is about 2 miles west of Reading, in Reading. In Tilehurst Within, as across Reading, every roof gets the same careful survey. Across Reading, we cover Tilehurst Within and the places around it.
Here we cover the RG30 and RG31 postcode area for thermal roof surveys. Streets in the area include Usk Road, Ash Road and Tay Road. If you’re just outside Tilehurst Within, we cover Norcot (1 mile north-east), Tilehurst (1 mile north-west), Horncastle (1 mile south), Little Heath (1 mile west) and Fords Farm (1 mile south). Within a short drive, we also cover Caversham (3 miles north-east), Shinfield (5 miles south-east), Arborfield Garrison (8 miles south-east), Whitley Wood (4 miles south-east), Sonning Common (5 miles north-east) and Whitley (4 miles south-east). Tilehurst Within is one of the larger places we cover in Reading.
What’s near Tilehurst Within
We work in homes and buildings around The Butchers Arms, Prospect School and Battle School and the streets around them. The closest station to Tilehurst Within is Tilehurst station, roughly 1.1 miles north of the centre. Well-known places in the area include Battle Hospital (1.5 miles east) and Royal Berkshire Regiment Museum (1.2 miles east). Not far away are Moor Copse Nature Reserve and South Lake.
Questions from Tilehurst Within
Does a conservation area affect roof work in Tilehurst Within?
You can check whether a building is listed on Historic England’s list, and your council can tell you if it’s in a conservation area. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material.
Do you cover smaller places like Tilehurst Within?
Yes, Tilehurst Within is covered. We survey roofs across London and South East England, and smaller places are part of that. The journey is planned ahead, so it is useful to know about access.
What conditions are best for thermal imaging?
Conditions on the day have a big effect on what the camera can show. A dry surface, little wind and a sunny spell beforehand help most. We record the conditions in the report, so you know how much weight to give the images.
Is thermal imaging good for finding leaks?
It frequently helps show where to look. Water can travel under a covering before it shows inside, and temperature patterns can help follow it. It’s used alongside a close inspection and moisture readings, as the camera alone can’t prove a leak.
Can you survey a shared roof?
Yes. Shared roofs just need a little more planning. Mention it when you contact us and we’ll plan the survey around it.
Are you structural engineers?
No. We are roof surveyors, not structural engineers. We’ll recommend an engineer if we see signs that call for one.
Does thermal imaging work on slate and tile roofs?
It can help, but the results are often less clear than on a flat roof. The air space under slates and tiles can hide patterns, so we also look from the loft where it is safe.
Roof by roof
Felt and asphalt flat roofs
Felt and asphalt roofs often show wet areas as patches that differ from the rest. Moisture readings are used to check them.
Loft insulation
From inside the loft, thermal imaging can show gaps in insulation and cold spots. We look where there’s safe access.
When to book a survey in Tilehurst Within
Not every roof problem shows on the surface. Wet insulation, gaps in insulation and heat loss are frequently invisible from outside. A thermal camera adds another way of finding them.
Look out for signs like these:
- Cold spots on ceilings under the roof
- Areas losing heat at the eaves and junctions
- Damp where roofs meet walls and chimneys
- Thin or uneven insulation in the roof
If your house is among the older ones in the streets near Church of St Michael, steep roofs, tall chimneys and hidden valleys can be hard to see from ground level, and that is where a view from above or with a thermal imager helps.
Questions to ask before you book
- How they’ll see the roof: from ground level, the loft, the roof or by drone
- If they fly a drone, whether they hold a CAA Flyer ID and Operator ID
- Whether you get a written report with photos
- Is VAT included in the price?