Kent · London and the South East
Thermal Roof Survey in Warmlake
Thermal roof surveys around Warmlake, with a written report you can act on. Book a weekday or weekend visit.
- Leaks far from where the stain appears
- Damp around roof outlets and upstands
- Damp that repairs haven’t cured
Roof by roof
Pitched slate and tile roofs
Thermal images of a pitched roof can still show heat loss patterns and some damp areas. The report explains what the images can tell you and what they cannot.
Single-ply and EPDM roofs
On big single-ply roofs, the camera helps show where to take readings. That makes the survey more focused.
Thermal roof survey in Warmlake: what you get
Thermal imaging works best in the right conditions. A sunny day before the survey, a dry roof surface and little wind all help. Rain, a strong wind or heavy cloud can make the images less clear. We talk through the forecast as you book, and our report notes the conditions and how they affected what we saw. If you’ve noticed areas losing heat at the eaves and junctions and water that travels before it shows, a survey will tell you what’s going on, on insulated roof spaces, commercial roofs and pitched roof slopes alike.
Somewhere as small as Warmlake, older roofs are often steep and partly hidden by trees or outbuildings. A drone and a thermal camera each give a view you cannot get from the ground. Weather and airspace are looked at ahead of the visit, and the journey is planned beforehand. Older roofs with steep slopes and tall chimneys are where the extra view helps most.
It is not only a list of defects. It explains what we found, why it matters and what we recommend.
- Location
- Warmlake (ME17)
- Wider area
- Kent
- Prices
- From £400 inc. VAT
- Your report
- A written report with photos, by email
- When we survey
- Weekdays, Saturdays and Sundays
- Cover
- Professional indemnity and public liability
- Telephone
- 07833 053749
- Page updated
- 27 October 2026
How the survey works
We check the roof from outside and, where it is relevant and there is safe access, from inside the roof space too. In the loft, the signs we look for are staining, damp, daylight and sagging. The whole visit typically takes about 1–2 hours for most houses, and longer for a large or complex roof. Older rural homes like those around Warmlake can have a main roof, lower lean-to roofs and outbuildings all joined together. Each part is looked at from wherever it can be seen safely.
- We start by discussing the roof, any signs of damp and how the weather may affect the images.
- The roof is inspected visually from safe viewpoints.
- Thermal images are taken to show differences in surface temperature.
- Any patterns of interest are checked with moisture readings where we can reach them.
- You get a report with thermal images, photographs and our recommendations.
Preparing for the visit
- For a flat or shared roof, check access with the building owner or managing agent
- Let us know about any leaks, stains or damp patches you know of
- Tell us about parking before the day
How to book
We survey roofs on weekdays and at weekends. To find a date that works for you, phone 07833 053749 or email us.
Advice
Tips from our surveys
There is plenty you can do without going near the roof. What helps most:
- Take photos of stains as they appear, so we can compare
- Don’t switch the heating off before the visit
- Let us know where and when you’ve seen damp or stains
- Check the loft can be reached safely
After the visit, we put the thermal images, photographs and moisture readings into one report. Each image is explained in plain words, with our recommendations. Premium reports are sent the same day.
Keep outlets and gutters clear so water drains off the roof quickly. The less water sits, the less can find its way beneath.
Your questions about thermal roof surveys in Warmlake
Does a conservation area affect roof work in Warmlake?
Check Historic England’s online list first, then ask the council about conservation areas and any Article 4 direction. It matters most if you are planning to re-roof in a different material.
Is Warmlake within the area you cover?
We do. Villages and rural addresses get the same survey as a town house.
Is it a structural engineer’s report?
No. We are experienced roof surveyors, and visible signs like sagging are noted, but calculations and an engineer’s opinion are outside what we do. If one is needed, the report says so.
Does thermal imaging work on slate and tile roofs?
It can show heat loss and some damp, but it has more limits there. Our report is clear about what can be read from them, and we check them with a visual inspection and moisture readings.
Can you tell me if my roof has asbestos?
No. Asbestos surveys and testing are not part of what we do. We flag materials that could contain asbestos, like cement sheets or soffits on pre-2000 buildings and suggest a specialist asbestos surveyor checks them before any work.
How does a thermal imaging roof survey work?
It records surface temperature across the roof. Unusual patterns can point to trapped water, gaps in insulation or heat escaping, and we check them with moisture readings.
Do you carry professional indemnity insurance?
We are covered by professional indemnity and public liability insurance, for every survey we carry out.
Can I check my roof myself?
Inside, the loft is a good place to look, with care. Take a torch and only step on boards or joists, checking for stains, damp wood or chinks of daylight.
You can learn a lot from ground level. Binoculars help you spot slipped slates or tiles, gaps along the ridge and a leaning stack. Please don’t climb up for a closer look.
Common roof problems in Warmlake
Building owners and managing agents use thermal surveys to plan work on larger flat roofs. It can suggest which areas may be wet and which seem dry, so moisture readings can be targeted.
Here are some of the things we see often:
- Water getting in at parapets and stacks
- Ceilings that feel colder in places
- Leaks that are hard to trace
- Patches of heat loss across the roof
For an older house near a landmark like Church of St Michael, steep roofs, tall chimneys and hidden valleys can be hard to see from the ground, and that’s where a view from the air or with a thermal camera helps.
What to check before booking
- How soon the report will arrive
- Their insurance cover
- Will they check the loft as well as the outside?
- What experience they bring
Thermal roof surveys in Warmlake: local notes
Where the drone is part of the survey, we check the Drone Safety Map for restrictions before flying. About 2.1 miles north lies Stoneacre, a reminder of how long the area around Warmlake has been built on. Older roofs in the wider area can hide decades of patch repairs, so the detail matters.
If you look after a building such as Sutton Valence Primary School, a drone or thermal camera can show a large roof in a single visit.
Warmlake is about 4 miles south-east of Maidstone, in Kent. Surveys in Warmlake work the same way as everywhere we cover: a proper look at everything that’s safely in view, photos and a clear written report. Across Kent, we cover Warmlake.
All of ME17 is covered for thermal roof surveys. That includes homes and businesses on Warmlake Orchard, Oast Gardens and Maidstone Road and the roads around them. We also cover Five Wents (1 mile north), Sutton Valence (1 mile south), Langley Heath (1 mile north), Langley (1 mile north) and Chart Sutton (1 mile west). Larger places within reach include Maidstone (4 miles north-west), Ashford (13 miles south-east), Sittingbourne (10 miles north-east), Royal Tunbridge Wells (15 miles south-west), Tonbridge (14 miles west) and Faversham (14 miles north-east).
Landmarks near Warmlake
Around Warmlake, our work takes us to homes and buildings near The Plough Inn and the streets around them. Warmlake’s nearest station is Hollingbourne station, roughly 3.3 miles north-east. Other landmarks nearby include KIMS hospital (4.6 miles north) and The Dog Collar Museum (2.3 miles north-east).
Nearby places to Warmlake
Other services in Warmlake
Why it’s worth a survey now in Warmlake
Repeated repairs that do not stop a leak are a sign the source hasn’t been traced. Thermal imaging with moisture readings can help narrow it down, rather than more guesswork. Matching old materials, like handmade tiles or stone slates, can take time to source. That is one more reason to find defects before they become urgent.
What a survey costs comes down to the roof itself: how big it is, how high it is, the number of separate roofs and how it can be reached and seen safely. Our price is from £400, including VAT.
What you get with us
- 5,000+ surveys completed
- Drone flown under a CAA Flyer ID and Operator ID
- Independent findings on the roof’s condition
- Satisfaction rate of 98%
Read how roof surveys are priced and two real surveys.