Kent · London and the South East
Milebush Electronic Leak Detection
Find out what’s going on with the flat roof membrane before you decide what to do next. We carry out electronic leak detection in Milebush.
- Stains far from any visible defect
- Leaks under green or ballasted roofs
- Breaches around outlets and penetrations
What electronic leak detection doesn’t cover
Some things can’t be seen without opening up the roof, and that sets some limits:
- Areas we can’t reach or that can’t be tested
- The extent of water in the insulation
- Leaks from walls, copings or rooflights
If you are not sure which survey you need, phone 07833 053749 or drop us an email and we’ll give you a straight answer before you book. What a survey covers and doesn’t.
Roof types and parts we check
- Liquid-applied waterproofing
- Single-ply roofs
- Commercial flat roofs
- Flat roof membranes
- Roof terraces and balconies
- Green roofs
Electronic leak detection in Milebush
ELD suits many waterproofing membranes on flat roofs, on homes, blocks and commercial buildings. It can be used to trace an existing leak or to test a new membrane before it’s covered. We quote for each roof based on its size and build-up. We can test on weekdays and at weekends, depending on the weather. Just ask about your roof. If you’ve noticed gaps at membrane joints and waterproofing to test before it’s covered, a survey will tell you what’s going on, whatever the roof.
Some older homes in villages like Milebush are listed or in a conservation area, which can shape what a new flat roof may look like. If you’re planning work, check with the council first. Knowing the roof’s condition is the starting point. Listed building consent is needed for changes that affect a listed building’s special interest.
We write the report in plain English, so it makes sense without any roofing background. Each point is backed by a photo where possible, and recommendations are put by urgency where it matters.
- Location
- Milebush (TN12)
- Wider area
- Kent
- Cost
- Quoted for your roof
- Your report
- Written, with photos, emailed to you
- When we survey
- Weekdays, Saturdays and Sundays
- Insurance
- Professional indemnity and public liability
- Phone
- 07833 053749
- Last updated
- 27 October 2026
The survey, step by step
You do not need to do much on the day. Point out anything you’ve noticed, such as stains, drips or loose pieces, and we’ll take it from there. A typical survey takes longer on a large roof than a small one, and the build-up of the roof makes a difference too. For a village or hamlet like Milebush, the journey is planned beforehand: let us know about narrow lanes, gates, long drives and where we can park. The roof is looked at from ground level, from windows, from the loft where there’s safe access and from the roof where it is safe.
- We agree the area to be tested.
- We get the roof ready for testing.
- Testing runs across the agreed area.
- We mark the breach locations in our records.
- You receive the results to pass to your roofer.
Before the survey
- Note where any stains or damp appear
- Make a note of anything you’d like us to look at
- Let us know about parking near the property
Booking a survey
We confirm the price for the job before you book, so you know where you stand. We quote electronic leak detection for each roof, as the method and time depend on the roof. For a price for your roof, call 07833 053749 or email us.
Related advice
When to book a survey in Milebush
A breach can be left during installation. ELD on a new roof can show holes before they cause leaks.
These are some of the problems a survey can pick up:
- Leaks through a covered membrane
- Holes around roof penetrations
- Leaks showing away from the breach
- A flat roof leak that can’t be traced
For landlords with property near Marden station, a flat roof over a rented flat is easy to forget until the tenant reports a leak.
Before booking any roof surveyor
- Whether the loft is part of the inspection
- What happens after the report arrives
- Whether VAT is added on top
- What insurance they carry
What we look for on each type of roof
Green and ballasted roofs
Parts of the covering may have to come up. We explain what’s needed when we quote.
Single-ply membranes
Single-ply can be punctured by tools or fixings. Testing helps find them.
What electronic leak detection looks like in Milebush
Older houses across Kent often have handmade clay or peg tiles, and many have tile-hung walls. Kent’s older buildings take in oast houses and timber-framed Wealden hall houses as well. Flat roofs fill the gaps in between, on extensions, garages, dormers and business premises. England has around 10,000 conservation areas and about 500,000 listed buildings. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material, so check with the council.
Take an older house close to St Michael and All Angels Church: flat-roofed rear additions and dormers added over the years are worth checking.
Milebush is about 6 miles south of Maidstone, in Kent. We carry out electronic leak detection in Milebush for houses, flats, blocks and commercial buildings. Milebush is one of the places in Kent we cover for electronic leak detection. For surveys nearby, see our Maidstone page.
Every address in TN12 is within our area for electronic leak detection. That includes homes and businesses on Maidstone Road and Milebush Lane and the roads around them. We also cover the places around Milebush: St Ann's Green (1 mile east), Underling Green (1 mile north-east), Wanshurst Green (1 mile south-east), Cross-at-Hand (2 miles east) and Marden Thorn (2 miles south). We also work in nearby towns such as Maidstone (6 miles north), Sittingbourne (15 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (11 miles west), Tonbridge (10 miles west) and Kings Hill (7 miles north-west).
Near you in Milebush
The nearest railway station is Marden station, roughly 1.1 miles south-west of the centre. A little further out are Sutton Valence Castle (4.2 miles north-east) and Oakwood Hospital (5.7 miles north).
Tips that help
From years of surveys, a few habits stand out:
- Make sure trades protect the waterproofing
- Keep foot traffic on flat roofs to a minimum
- Have roof specifications to hand
- Note where leaks show inside and when
Once repairs are made, the roof can be tested again if you want to check them if the build-up allows.
Keep people off the flat roof unless they need to be there. Many breaches come from foot traffic.
Leave it or get it looked at?
Leaks left running can wet the insulation and deck. Locating it early helps limit the damage. Where a roof is exposed, as many are in small places like Milebush, driving rain gets into any weakness, and damp in older walls is slow to dry out.
Every price we give includes VAT. Electronic leak detection is quoted for your roof, because the method depends on the roof. We confirm the price for the job before booking.
Why choose Independent Roof Survey in Milebush
- Surveys on weekdays and at weekends
- More than 20 years surveying roofs
- CAA-registered drone operator (Flyer ID and Operator ID)
- Over 5,000 surveys carried out
Take a look at our cost guide and two real surveys.
Milebush questions
Does a conservation area affect roof work in Milebush?
Your council is the best source, with Historic England’s list for listed buildings. A change of roofing material may need consent in either case.
Do you cover smaller places like Milebush?
Yes. Milebush is within the area we cover, which takes in towns, villages and rural addresses. Our area covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is the repair part of the test?
No, the test finds the breaches and your roofer repairs them. The report gives your roofer the locations.
Which method do you use?
We choose the method that suits the roof. We’ll explain why when we quote.
Is this a RICS survey?
No. It is a specialist roof survey, not a RICS Level 2 or Level 3 building survey. It focuses on the roof and can sit alongside a RICS survey.
Does electronic leak detection work on all membranes?
It depends on the membrane and the build-up. Share any details you have and we will confirm suitability.
What does electronic leak detection do?
A sound membrane blocks the test current, so wherever there’s a hole, it passes through. That’s how we locate breaches you can’t see.