Hampshire · London and the South East
Thermal imaging roof survey in Cowesfield Gate, Hampshire
Thermal imaging to find moisture and heat loss patterns in a roof across Cowesfield Gate, with drones and thermal imaging where they help. Call or email for a price.
- Possible trapped moisture under a flat roof covering
- Water that travels before it shows
- Missing or slipped insulation
Why it’s worth a survey now in Cowesfield Gate
Once insulation under a membrane is wet, it tends to stay wet. Over time, it insulates less well and can harm the deck. Finding them early can mean a smaller job. Older cottages and farmhouses around Cowesfield Gate can have roof timbers that have been there a very long time, where water from a failed roof can cause rot if it’s left.
Simple, low roofs take less time to survey than tall or complicated ones, and the package matters as well. The price is always agreed first.
What you get with us
- A report with photographs
- 5,000+ roofs surveyed
- Drone and thermal imaging surveys available
- A sub-250g drone, flown with a CAA Flyer ID and Operator ID
See our cost guide or our case studies.
Thermal roof survey in Cowesfield Gate
Flat roofs over extensions, garages, flats and commercial buildings are where thermal imaging often helps most. Patterns can suggest where water is trapped under the covering. On pitched roofs, slates and tiles over a ventilated space can hide what’s below, so we also look from the loft where we can reach it safely. If you’ve noticed damp around chimneys and parapets and thin or uneven insulation in the roof, a survey will tell you what’s going on.
Some older homes in villages like Cowesfield Gate are listed or in a conservation area. Neither a drone survey nor a thermal survey involves any work on the roof, so it is a gentle way to see the condition of an old roof. Check with the council before planning any work on a listed building or one in a conservation area.
How fast the report arrives depends on the package: the Basic Survey within 48 hours, the Standard Survey in 24 to 48 hours and the Premium Survey on the same day.
- Place
- Cowesfield Gate (SO51, SP5)
- Wider area
- Hampshire
- Cost
- From £400 inc. VAT
- Reports
- Written, with photos, emailed to you
- Survey days
- Weekdays and weekends
- Insurance
- PI and public liability insurance
- Phone
- 07833 053749
- Last updated
- 27 October 2026
Roof by roof
Pitched slate and tile roofs
Inside the roof space, thermal images can help with damp around stacks, valleys and roof windows. Findings are checked with moisture readings.
Parapets, valleys and junctions
Damp at junctions can be hard to see by eye. We combine a close visual check with the thermal images.
Airspace, weather and Cowesfield Gate roofs
If the drone is used for your survey, we check the Drone Safety Map for restrictions before flying. A number of Hampshire villages keep thatched roofs on their older buildings. Across the South East, older homes tend to have slate or clay tiles, and many later ones concrete tiles. Where a roof is steep, tall or hard to see from the ground, drone photos and thermal images add detail.
Historic houses such as Landford Manor, about 2.3 miles south, show how far back building around Cowesfield Gate goes. Older roofs nearby can be steep and hard to see from the ground, and a survey from above or with a thermal imager doesn’t touch the roof itself. In and around Cowesfield Gate, as anywhere, a roof is easiest to deal with when its problems are found early.
Cowesfield Gate is about 6 miles west of Romsey, in Hampshire. In Cowesfield Gate, as across Hampshire, every roof gets the same careful survey. Cowesfield Gate is one of the towns and villages in Hampshire we cover. For surveys nearby, see our Southampton page.
We survey roofs across SO51 and SP5 for thermal roof surveys. You’ll find streets such as Bunny Lane and Cowesfield, all of which we cover. Further out, we also cover Winchester (13 miles east), Eastleigh (12 miles east), Andover (15 miles north), Totton (8 miles south-east), Chandler's Ford (10 miles east) and Hedge End (15 miles south-east).
What’s near Cowesfield Gate
The closest station to Cowesfield Gate is Dean station, about 2.4 miles north-west. Well-known places in the area include Romsey Community Hospital (5.7 miles east).
Also near Cowesfield Gate
Other services in Cowesfield Gate
The survey, step by step
Once we have finished looking, we write up our findings in a report with photos, emailed to you. On timing, most surveys take roughly 1–2 hours at a house, including the thermal images, and around 3–4 hours for a commercial roof. In a small place like Cowesfield Gate, access is typically the main thing to plan. Let us know about outbuildings, past repairs and any leaks you’ve noticed. Weekday and weekend visits are available.
- We start by discussing the roof, any signs of damp and how the weather may affect the images.
- We look at the roof from ground level, from windows and from the roof itself where it is safe.
- Thermal images are taken to show differences in surface temperature.
- We check the patterns that stand out with moisture readings where there is safe access.
- You get a report with thermal images, photographs and our recommendations.
How to prepare
- Point out any leaks or damp patches
- If the roof is shared, arrange access with whoever manages the building
- Make a note of anything you’d like us to look at
Getting a price
Once you know what you need, phone 07833 053749 or email us. We’ll suggest a package, agree the price and find a date.
Advice
Surveys for landlords and agents in Cowesfield Gate
If the property is let, the agent or a tenant can let us in, at a time agreed ahead of time. Surveys run on any day of the week, which helps when tenants work during the week.
Freeholders and residents’ companies use a roof report to plan and budget.
Cowesfield Gate questions
Is Cowesfield Gate within the area you cover?
Yes, Cowesfield Gate is covered. We survey roofs across London and South East England, and smaller places are part of that. Longer journeys are simply planned in advance.
Is Cowesfield Gate in the area you cover?
Yes. We cover the whole of London and South East England, and Cowesfield Gate is part of that. You can ring 07833 053749 or email us with the address and a few details.
How long will you be at the property?
Expect it to take about one to two hours at a house, including the thermal images, and around 3–4 hours for a commercial roof. The written report follows by email, on the timescale of your package.
What insurance do you have?
We are covered by professional indemnity and public liability insurance.
Can you check my loft insulation with a thermal camera?
The camera can point to heat loss and gaps in insulation. The survey isn’t an energy rating or a heat loss calculation, but the report shows where to look more closely.
What happens next?
You will get the report by email. With Standard there’s a follow-up consultation; with Premium, an in-person consultation.
Can a thermal camera see water?
No, not on its own. It shows temperature, and wet materials frequently behave differently from dry ones. That is why we check any patterns with moisture readings.
What we can’t see
No survey can tell you everything, and we’d rather be clear about that before booking. Keep these in mind:
- Proving moisture from the images alone
- A structural engineer’s assessment
- The condition of timbers we can’t see
If you’re not sure which survey you need, phone 07833 053749 or use the contact form and we will give you a straight answer. What a survey covers and does not.
What we look at
- Ceilings below the roof
- Pitched roof slopes
- Flat roofs
- Loft conversions
- Commercial roofs
- Insulated roof spaces
Before and after the survey
Getting the most from a thermal roof survey starts before we arrive and carries on afterwards. Some tips:
- Talk to us about the weather when booking
- Use the report as a baseline for later checks
- Clear leaves from outlets and gutters each autumn
- Keep dated photos of any marks on ceilings
We note the weather and surface conditions, and how they may have affected the results. That way you know how much weight to give each finding.
Check that loft insulation is laid evenly and hasn’t been pushed aside. Gaps often appear after work in the loft.