Kent · London and the South East
Chimney Survey in Ringlestone
Chimney surveys around Ringlestone, with a written report you can act on. Weekday and weekend visits available.
- Flaunching that has broken away
- Spalled or crumbling bricks
- Flashings pulling away from the stack
Chimney survey in Ringlestone: what you get
A damp patch on a chimney breast doesn’t always come from the same place. It might come in at the top, through worn pointing or porous bricks, or where the flashings meet the roof. Moisture trapped inside a stack with no ventilation can also cause damp. Our survey checks each of these and records the likely cause. You then know where to start. We survey shared and party-wall stacks, chimney breasts and brick chimney stacks, and people most frequently book us about a chimney out of line and flashings pulling away from the stack.
In a smaller place like Ringlestone, homes range from older cottages to bungalows and newer houses. Coverings range from slate and clay tiles on older homes to concrete tiles on many later ones. On older homes, chimney stacks, valleys and gutters are normally where the work is. Nails and battens under older coverings frequently give out before the slates or tiles themselves.
The report records the chimney stack as we found it on the day. That makes it useful now and a handy reference later, such as when you want to compare after future work.
- Where
- Ringlestone (ME14, ME16)
- Wider area
- Kent
- Cost
- From £150 inc. VAT
- Report
- A written report with photos, by email
- Survey days
- Monday to Sunday, daytime
- Insurance
- PI and public liability insurance
- Call
- 07833 053749
- Page updated
- 27 October 2026
What a chimney survey doesn’t cover
Every survey has limits, and it’s better to know them up front. Bear these in mind:
- A structural engineer’s assessment
- Gas safety checks, which need a Gas Safe registered engineer
- Hidden damage within the stack
If you’re not sure which survey you need, ring 07833 053749 or email us and we will give you a straight answer. What our survey covers.
What we look at
- Flaunching
- Lead flashings
- Chimney pots and cowls
- Shared and party-wall stacks
- Chimney breasts
- Brick chimney stacks
What we do, step by step
There is not much for you to do on the day. Show us any stains, drips or problem areas you know about, and we’ll get on with the inspection. A typical survey takes an hour or two for most houses, and more on a big or complicated roof. In a smaller place like Ringlestone, as anywhere, the forecast plays a part: the parts that need calm, dry weather are planned around it.
- We start by noting which stacks are in use, shared or causing concern.
- We check the roof around each stack, including the flashings.
- We look at the flaunching and pots on every stack.
- We note the brickwork, pointing and any sign of leaning.
- The report explains the condition and which work is most urgent.
Before the survey
- If the roof is shared, arrange access with whoever manages the building
- Make a note of anything you’d like us to look at
- Tell us about parking before the day
How to book
To get a price for chimney surveys in Ringlestone, call 07833 053749 or send us an email. The address, the type of property and what you need to know help us give you an accurate price.
Advice
Can I check my roof myself?
A DIY look is useful, but it is not a survey. From ground level, valleys, flashings and the backs of chimneys are often out of sight.
After heavy rain, check ceilings and the tops of walls for new stains. Take a photo and write down when you saw it, as it helps a surveyor trace the cause.
Chimney surveys in Ringlestone: local notes
Many older homes in Kent have handmade clay tiles, including Kent peg tiles held by pegs through two holes, and tile-hanging on their upper walls. The county’s older buildings also include oast houses and timber-framed Wealden hall houses. Whichever you have, the details that tend to fail before the covering itself get the closest look. Stoneacre, about 3.7 miles south-east, is one of the historic houses in the wider area around Ringlestone. On older houses around here, roofs frequently carry the marks of earlier repairs, from replaced slates to new lead.
Take a building like North Borough Junior School: its roofs, gutters and any chimneys need the same checks as a house’s, just on a bigger scale. Trees in and around Whatman Park shed leaves that can end up in nearby gutters. Shop and office owners around Fremlin Walk may find that knowing the roof’s condition lets you budget for work rather than pay for emergencies.
Ringlestone is about 2 miles north of Maidstone, in Kent. Surveys in Ringlestone work the same way as everywhere we cover: a careful inspection, photos and a written report. Our area takes in places right across Kent, large and small.
All of ME14 and ME16 is within our area for chimney surveys, from the main roads to the quietest streets. We cover properties on Hyde Road, Mill Lane and Edna Road and the roads around them. We also cover Sandling (1 mile north), Abbey Gate (1 mile north), Foley Park (1 mile south-east), Penenden Heath (1 mile south-east) and Harbourland (1 mile east). Larger places within reach include Sittingbourne (10 miles east), Sevenoaks (14 miles west), Royal Tunbridge Wells (15 miles south-west), Gravesend (11 miles north-west), Tonbridge (12 miles south-west) and Northfleet (12 miles north-west).
Near you in Ringlestone
Locally, jobs take us to homes and businesses close to St. Simon Stock Catholic School, Whatman Park and Harvester pub and the streets around them. For rail, the closest station is Maidstone Barracks station, about 0.8 miles south. A little further out are Maidstone Hospital (1.7 miles south-west) and Fremlin Walk (1 mile south). For a walk, there is Burham Down and Boxley Hills.
Landlords, agents and block managers in Ringlestone
Letting agents and landlords in Ringlestone book surveys as well as homeowners. The report gives you a dated record of the chimney stack, with photos, which helps you plan work between tenancies.
Where a roof is shared: access has to be agreed with whoever owns or manages the building. Mention it when you get in touch and we’ll plan the visit with that in mind.
How the survey changes by roof type
Chimney breasts and the loft
Where a breast has been taken out, we check what supports the stack. A structural engineer should confirm whether it’s adequate.
Rendered stacks
We cannot see the bricks behind render without it being opened up, so the report explains what we could and couldn’t assess.
What affects the price in Ringlestone
Not every roof costs the same to survey, for these reasons:
- Commercial roofs and larger buildings
- How tall the building is and how easy the roof is to see
- Whether you choose the Basic, Standard or Premium Survey
- Roof area
What a survey costs comes down to the roof itself: how big it is, how high it is, the number of separate roofs and how it can be reached and seen safely. Our price is from £150, including VAT.
Booking your survey
Here’s what helps us most when you contact us:
- The reason for the survey, such as buying, a leak or storm damage
- Where the property is, with the postcode
- Whether there’s a loft hatch, a shared roof or tricky access
- When you need the report by
To book a survey, call 07833 053749 or use the contact form and let us know the address and what’s prompted the survey. You’ll know the price before anything is booked.
Common questions in Ringlestone
Will you come out to Ringlestone?
We do. A small place gets exactly the same survey as a big one, with the route planned beforehand.
Does a conservation area affect roof work in Ringlestone?
Start with Historic England’s list for listing and your council for conservation areas. It is worth checking before planning roof work, as both can affect what’s allowed.
Does someone need to be in?
Not necessarily. An outside-only look can be arranged beforehand, but the loft and any rooms with damp need someone to let us in.
Can you survey at the weekend?
We survey seven days a week: Monday to Friday, Saturdays and Sundays. Just let us know the days that suit you.
Which parts of the chimney do you look at?
The survey covers the pots and cowls, the flaunching, the pointing, the bricks and the flashings. We also check chimney breasts and the stack in the loft space where we can reach. Everything is written up with photographs.
What do I do with the report?
You’ll get the report by email. The Standard Survey includes a follow-up consultation, and the Premium Survey an in-person consultation.
Is a leaning chimney dangerous?
A leaning stack should be looked at. Our survey notes how it looks and the condition of the bricks and joints, and if it may be a structural issue, we recommend a structural engineer.