Buckinghamshire · London and the South East
Drone roof survey in Bedgrove, Buckinghamshire
Not sure what state the roof is in? You can book a drone roof survey in Bedgrove and across Buckinghamshire.
- Chimney tops in poor condition
- Gaps where slates or tiles have gone
- Ponding and splits on a high flat roof
Drone roof survey in Bedgrove
Our drone weighs under 250g, and we’re a CAA-registered drone operator, with a Flyer ID and an Operator ID. We keep it in sight throughout, and well below the 120-metre height limit. Every flight is planned around the roof, the site and the people nearby. Before every flight, we check the airspace and the weather. Safety comes first on every visit. If you’ve noticed vegetation in valleys and gutters and loose ridge and hip tiles, we can find out what’s behind it.
Around Bedgrove, lots of roofs are low enough to see partly from the garden or the street. The parts you can’t see, such as rear slopes, valleys and chimney tops, are where a drone or thermal camera adds detail. Both depend on the weather on the day, as calm, dry conditions suit both. Close-up images often show wear on ridges, verges and flashings that cannot be judged properly from ground level.
Pictures do a lot of the work in our reports, so you can see each defect rather than just read about it. Anything out of sight on the day is listed as such.
- Place
- Bedgrove (HP21, HP20, HP22)
- Region
- Buckinghamshire
- Price
- From £400 inc. VAT
- Reports
- Written, with photos, emailed to you
- When we survey
- Weekdays and weekends
- Insured
- PI and public liability insurance
- Telephone
- 07833 053749
- Last updated
- 27 October 2026
Honest limits
We only report everything that’s safely in view on the day, so there are some things a survey can’t cover:
- What’s under the slates, tiles or felt
- Structural calculations (that’s a structural engineer’s job)
- Photos in conditions too poor to fly
If in doubt, call 07833 053749 or email us and we will suggest the right survey. What a survey covers and doesn’t.
What we check
- Fragile roofs
- Tall and steep roofs
- Large and complex roofs
- Flat roofs on upper floors
- Chimney stacks
- Valleys and parapet gutters
What else we do in Bedgrove
What affects the cost of drone roof surveys
We confirm the price for the job before booking. This is what makes a difference:
- Extensions, dormers and garages with roofs of their own
- The shape of the roof and its details
- The package you choose: Basic, Standard or Premium
- House, block, shop or office
To find out what your survey will cost, ring 07833 053749 or send us an email and tell us about the roof. We will confirm the figure before booking.
Helping us price your survey
A few details help us recommend the right survey and price. When you contact us, tell us:
- Dates you’re working to, such as exchange
- Pictures of the roof from a safe spot, if you have them
- Where any leaks, stains or damp patches show inside
- The kind of building and roof involved
If you have photos of the roof, send them over. Take them safely from the ground or a window; never climb up to get a better view. To get started, phone 07833 053749 or email us.
Flying and imaging in Bedgrove
RAF Halton is about 3 miles away, so we check the Drone Safety Map for restrictions before any flight. Some villages in Buckinghamshire still have thatched roofs. Across the South East, older homes tend to have slate or clay tiles, and many later ones concrete tiles. Older coverings on steep or tall roofs are hard to judge from below, so close-up aerial photos and thermal images help.
If you run a business near Friars Square, thermal images can show trapped moisture across a wide commercial roof. The streets around a church such as Church of the Holy Spirit are frequently among the oldest in a place, and if your house is among the older ones nearby, tall stacks and steep slopes are easier to judge with close-up aerial photos than from the pavement. Anyone responsible for a site like Bedgrove Infant School will know that big roofs are where aerial photos and thermal images show the most at once.
Bedgrove is about 2 miles south-east of Aylesbury, in Buckinghamshire. Bedgrove gets the same service as everywhere else we work: a careful inspection, photographs and a written report. Bedgrove is one of the towns and villages in Buckinghamshire we cover for drone roof surveys. Milton Keynes is in our area too.
Here we cover the HP21, HP20 and HP22 postcode area for drone roof surveys. That includes homes and businesses on Aplin Road, Regent Road and Eascote Road and the roads around them. We also cover the places around Bedgrove: Turnfurlong (1 mile north-west), Broughton Crossing (1 mile north), Broughton (1 mile north), Burcott (2 miles north) and Bierton (2 miles north). Further out, we also cover High Wycombe (12 miles south), Chesham (10 miles south-east), Amersham (12 miles south-east), Beaconsfield (15 miles south-east), Princes Risborough (6 miles south) and Haydon Hill (3 miles north-west).
Around Bedgrove
Locally, jobs take us to homes and businesses close to Stoke Mandeville Hospital Classes and The Grange School, among other places. The closest station to Bedgrove is Stoke Mandeville station, roughly 1.3 miles south of the centre. A little further out are Stoke Mandeville Hospital (0.9 miles south-west) and Friars Square (1.4 miles north-west). The countryside around Bedgrove includes Coombe Hill and Dancersend Nature Reserve.
Different roofs, different checks
Steep slate and tile slopes
On slate roofs, slipped slates often point to corroded nails. Close-up photos show how widespread it is.
Flat roofs on tall buildings
Leaks frequently start at outlets, edges and around plant. We photograph them closely, as far as the flight allows.
What we do, step by step
Photos are taken throughout the visit, so you can see in the report what we found and where. Close-ups come from the safest viewpoint available. Most surveys take an hour or two on an ordinary house, and longer for a large or complex roof. In a smaller place like Bedgrove, as anywhere, the forecast plays a part: the parts that need calm, dry weather are planned around it.
- You give us the address and let us know about the roof.
- Any flight restriction at the address is looked at, with permission requested if required.
- On the day, we check the wind, weather and site before flying.
- Close-up photos are taken of each slope, chimney, valley and gutter, with the drone always in view.
- You receive a written report with the photos and our recommendations.
Getting ready for the survey
- Leave side gates unlocked
- Tell us about parking before the day
- Gather any invoices or paperwork from past roof work
Booking a survey
A quick phone call is typically the easiest start: ring 07833 053749 or send us an email, and we’ll ask about the building and what you need. The price is agreed before a date is set.
Read more
Leave it or get it looked at?
Small defects on a high roof grow with each storm. Finding them now means less to put right. With lower homes, common in places like Bedgrove, there’s little between a roof defect and the ceiling, so water can show inside quickly once it gets past the covering. Finding the cause first saves a second job inside.
Bigger, taller and commercial roofs take more time to survey, so the price reflects that. The price is confirmed before you book.
Why choose Independent Roof Survey in Bedgrove
- Photos and a written report every time
- Clear package prices, inc. VAT
- Drones and thermal imaging where it applies
- PI and public liability insurance
Read our cost guide or our case studies.
Common questions in Bedgrove
Are there drone restrictions around Bedgrove?
That depends on where the roof is and on the weather. RAF Halton is about 3 miles away, so we check the Drone Safety Map for restrictions before any flight. Strong wind or a downpour also stops a small drone flying.
Is Bedgrove within the area you cover?
Yes, Bedgrove is covered. Our area covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it is useful to know about access.
When does the report arrive?
It depends on the package: the Basic Survey report arrives within 48 hours, the Standard Survey in 24 to 48 hours and the Premium Survey the same day. The report is emailed to you.
Is it a structural engineer’s report?
No. We are experienced roof surveyors, and visible signs such as sagging are noted, but we do not provide calculations or an engineer’s opinion. The report will say if you need an engineer.
What does the report include?
Written findings with photographs, covering the condition of the roof, the defects we found and what we recommend, in order of urgency where relevant. Standard adds moisture detection and a structural check; Premium adds thermal imaging, drone inspection where applicable and structural analysis.
Can you survey a shared roof?
Yes, once whoever controls the roof agrees access. On a shared roof we can only inspect the parts we are allowed to reach.
What insurance do you have?
Our cover is professional indemnity plus public liability.
Useful tips for Bedgrove property owners
Over many surveys, some simple habits stand out as worth the effort:
- Allow for a change of day in poor weather
- Share the postcode so we can check for restrictions
- Let neighbours know about the flight if your roof is shared
- Check there’s room outside for the drone to take off
You get an in-person consultation with the Premium Survey to talk through the photos and findings. It is a chance to ask about anything in the report.
Do not block the vents at the eaves. Condensation in the loft can damage timbers and insulation. Check insulation does not block the airflow.