Oxfordshire · London and the South East
Thermal Roof Survey in Baulking
Get a clear view of the roof at a property in Baulking from an independent roof surveyor. Visits run on weekdays and weekends, in the daytime.
- Possible trapped moisture under a flat roof covering
- Patches of heat loss across the roof
- Damp that repairs haven’t cured
How a thermal roof survey works in Baulking
A thermal imaging roof survey uses a thermal camera to show differences in surface temperature across a roof. Those patterns can point to trapped moisture, missing insulation or heat escaping. It is important to know that the camera shows temperature, not water, so findings are checked with moisture readings. It comes as part of our Premium Survey, from £400. Conditions on the day affect the results, and the report explains how. If you’ve noticed stains that keep coming back and patches of heat loss across the roof, a survey will tell you what’s going on, on pitched roof slopes, insulated roof spaces and flat roofs alike.
In a village or hamlet like Baulking, roofs can be steep, old and hard to see from the lane. Close-up drone photos and thermal images help show what can’t be reached safely. Both the forecast and the airspace are checked first, and the journey is planned in advance. Steep slopes and tall chimney stacks are where a close-up view adds the most.
How fast the report arrives depends on the package: the Basic Survey within 48 hours, the Standard Survey in 24 to 48 hours and the Premium Survey on the same day.
- Where
- Baulking (SN7)
- Region
- Oxfordshire
- Prices
- From £400 inc. VAT
- Your report
- Written, with photos, emailed to you
- Survey days
- Weekdays, Saturdays and Sundays
- Cover
- Professional indemnity and public liability
- Call
- 07833 053749
- Last updated
- 27 October 2026
What we do, step by step
Where it’s relevant and can be reached safely, the roof space is checked as well as the outside. Inside, we look for staining, damp, gaps and signs of movement. All in, the survey typically takes about one to two hours at most homes, while a commercial roof takes nearer three to four hours. Older roofs in small places like Baulking can have low, tight loft spaces, so it helps to know whether there is a loft hatch and how easy it is to reach. Only areas that can be reached safely are inspected.
- We go through the roof, the problem and the weather expected on the day.
- We look over the roof from wherever it’s safe.
- We take thermal images of the roof and of the loft where we can reach it.
- Patterns that stand out are checked with moisture readings.
- Each image is set beside a normal photo and explained in the report.
How to prepare
- Find any records of previous roof work
- Point out any leaks or damp patches
- Let us know where we can park nearby
Arrange a survey
We confirm the price for your roof before you book, so you know the cost up front. Prices start from £400, including VAT. For a price for your roof, call 07833 053749 or send us an email.
Advice
DIY checks: what’s safe
What you can’t do safely is get up close. Roofs are fragile and slippery, and falls from height are serious. That is where a survey comes in.
It is useful to keep a record: when leaks happen, ground-level photos and any past roof work. Send it with your enquiry, as it helps us focus the survey.
Baulking questions
Is my home in Baulking listed or in a conservation area?
For listing, use Historic England’s list; for conservation areas, ask the council. The answer matters most when a change of material is on the cards.
Will you come out to Baulking?
Yes, Baulking is covered. We survey roofs across London and South East England, and smaller places are part of that. Longer journeys are simply planned beforehand.
Do I need to be at home?
Not always. An outside-only look can be arranged beforehand, but anything inside needs someone there to give access.
How long have you been surveying roofs?
Over 5,000 surveys so far, over more than 20 years.
Will the camera show exactly where the water is?
Not directly. It shows surface temperature, and wet areas can show up because they hold heat differently. That’s why we check any patterns with moisture readings.
How long will you be at the property?
That depends on the size and shape of the roof, but most surveys take an hour or two for a house, rising to roughly 3–4 hours on a commercial building. The written report follows by email.
What do I do with the report?
You will receive the report by email, and you decide the next step: use it with a seller, an insurer, a roofer or a managing agent.
Places near Baulking
More services for Baulking
Why act early in Baulking
Wet insulation under a flat roof does not dry out on its own while the covering stays on. In time, it stops insulating properly and can damage the deck. Finding the wet areas sooner keeps the work smaller. In a small place like Baulking, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Prices start from £400, including VAT. Basic starts from £150, Standard from £250 and Premium from £400, VAT included, and we can help you choose.
Why book us in Baulking
- 98% of customers satisfied
- Visits on any day of the week
- Clear package prices, with VAT included
- Independent findings on the roof’s condition
Take a look at how roof surveys are priced and what we found on two real jobs.
Different roofs, different checks
Single-ply and EPDM roofs
Because these membranes are thin, patterns from below often show. Shiny surfaces can reflect heat, so we take care reading the images.
Parapets, valleys and junctions
Damp at junctions can be hard to see by eye. A careful visual inspection goes alongside the images.
What affects the cost of thermal roof surveys
To price your survey, we look at:
- The size of the roof
- If the survey needs thermal imaging or a drone
- How complicated the roof is, with its valleys, chimneys and parapets
- How many separate roofs there are, such as extensions, dormers and garages
Thermal roof survey starts from £400, including VAT. The final price depends on how big and how high the roof is, how it can be seen safely and which survey you book.
What we need to know
You don’t need to know any roofing terms. It’s enough to let us know:
- Where the property is, with the postcode
- Access details, such as a loft hatch or a shared roof
- What kind of property and roof it is
- Where water is showing inside, if it is
Unsure which package suits your roof? The easiest way is to phone 07833 053749 or drop us an email and describe the roof and why you want it surveyed. We’ll talk you through the options and what they cost.
Do you need a thermal roof survey in Baulking?
On big commercial and residential flat roofs, thermal imaging helps owners plan. It can suggest which areas may be wet and which seem dry, so moisture readings can be targeted.
Typical things we are asked to look at include:
- Areas of a flat roof that may hold water
- Patches of heat loss across the roof
- Ceilings that feel colder in places
- Moisture around outlets and upstands
The streets around a church such as Church of St Nicholas are often among the oldest in a place, and if your house is among the older ones nearby, older roofs can be steep and hard to see from the street, which is where aerial photos and thermal images help.
What to check before booking
- Do they have a CAA Flyer ID and Operator ID for drone work?
- Are they insured for the work?
- Whether you get a written report with photos
- Whether the loft space is looked at, where there is one
Flying and imaging in Baulking
Cotswold stone slates are found on older buildings in west Oxfordshire, and thatch survives in some of the county’s villages. Across the South East, older homes tend to have slate or clay tiles, and many later ones concrete tiles. A drone or thermal camera adds most on the steep, tall and hidden parts of roofs like these. England has around 10,000 conservation areas and about 500,000 listed buildings. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material, so check with the council.
Whatever the street in Baulking, a roof costs least to look after when faults are caught early.
Baulking is about 5 miles west of Wantage, in Oxfordshire. Roofs in Baulking get the same thorough look as anywhere else in Oxfordshire. We cover towns and villages across Oxfordshire, large and small. For surveys nearby, see our Oxford page.
Here we cover the SN7 postcode area for thermal roof surveys. We also cover Uffington (1 mile south-west), Fernham (2 miles north-west), Shellingford (2 miles north), Stanford in the Vale (2 miles north-east) and Bow (2 miles north-east). Within a short drive, we also cover Didcot (13 miles east), Abingdon-on-Thames (12 miles east), Witney (12 miles north), Carterton (11 miles north), Wantage (5 miles east) and Grove (5 miles east).
Around Baulking
Well-known places in the area include Faringdon Day Hospital (3.4 miles north-west) and Faringdon Castle (3.3 miles north-west). Not far away are Dragon Hill and Letcombe Valley.