Roof surveys across London and the South East 07833 053749info@independentroofsurvey.co.uk

Surrey · London and the South East

Thermal imaging roof survey in Brook, Surrey

Know where you stand with the roof before you spend money on it. Thermal roof surveys in Brook, with photos and a clear written report.

  • Damp around roof outlets and upstands
  • Water getting in at parapets and stacks
  • Thin or uneven insulation in the roof

Independent thermal roof surveys in Brook

Can I check my roof myself?

Watch the gutters in a downpour, from a window or the ground. Overflowing water can point to a blockage or a sagging run.

If you have a loft with safe access, take a look inside. Take a torch and only step on boards or joists, and look for staining, damp timber or daylight coming through.

Thermal roof survey in Brook

Thermal imaging can also show where a roof is losing heat. Gaps in loft insulation and poorly insulated areas can stand out on the images. It works best when the building is heated and it’s colder outside. The report shows the images and explains what they may mean. It is not an energy rating or a heat loss calculation. If you’re worried about moisture around outlets and upstands and wet insulation beneath the membrane, a survey will tell you what’s going on, whatever the roof.

Older buildings in small places like Brook may be listed or in a conservation area. A look by drone or thermal camera does not touch the roof, so it’s a gentle way to see the condition of an old roof. Changes that affect a listed building’s special interest need listed building consent, so check with the council first.

Findings are set out part by part, from the main slopes down to the gutters and outlets. You’ll see the good as well as the bad.

Illustration of a roof in thermal colours with a temperature scale beside it
Place
Brook (GU8)
Wider area
Surrey
Price
From £400 inc. VAT
Report
Emailed report with photos and recommendations
When we survey
Weekdays and weekends
Insured
PI and public liability insurance
Call
07833 053749
Page updated
27 October 2026

Why get it checked now?

The longer moisture sits in a roof, the more it can affect timbers and finishes below. Surveying sooner gives you more choice about what to do. Older and listed buildings around Brook may need consent and matching materials for repairs, so a defect found early gives time to plan the work properly.

Larger roofs, taller buildings and commercial roofs take longer, so they’re priced to match. You’ll know the figure before booking.

What you get with us

  • 20+ years’ experience
  • Packages from £150, inc. VAT
  • Drone and thermal imaging surveys available
  • Professional indemnity and public liability insurance

Take a look at how roof surveys are priced and what we found on two real jobs.

What happens on the day

Safety comes first on every visit. Everything that can be seen safely is inspected, and if part of the roof can’t be seen, the report says so. The survey typically takes an hour or two for most homes, plus time to check any thermal findings with moisture readings. For a village or hamlet like Brook, the journey is planned ahead of time: let us know about narrow lanes, gates, long drives and where we can park. On the day, we inspect what can be seen safely, inside and out.

  1. You tell us about the roof and any damp, leaks or cold rooms.
  2. We check the conditions and note how they may affect the images.
  3. We inspect the roof and take thermal images during the same visit.
  4. We back up the thermal patterns with moisture readings.
  5. You get the report the same day, with an in-person consultation to follow.

Preparing for the visit

  • If it isn’t your property yet, arrange access through the agent
  • Jot down any questions you want answered
  • Keep pets in another room

Book a survey

To get a price for thermal roof surveys in Brook, phone 07833 053749 or send us an email. A few details about the property and the roof help us give you an accurate price.

Ask for a survey

Related advice

Rented homes, blocks and businesses

Freeholders and residents’ companies use a roof report to plan and budget, with the most urgent items set out first.

We survey roofs for landlords and letting agents as well as homeowners. A written report with photos gives you a clear record of the roof.

What a thermal roof survey looks like in Brook

Listing and conservation areas can both shape what roof work is allowed on an older home. Your council and Historic England’s list will tell you where you stand. If the drone is used for your survey, we check the Drone Safety Map for restrictions before flying.

Whatever the street in Brook, a roof costs least to look after when faults are caught early. For site and facilities teams at buildings such as King Edward's School Witley, a drone or thermal camera can show a large roof in a single visit.

Brook is about 8 miles south-east of Farnham, in Surrey. In Brook, as across Surrey, every roof gets the same careful survey. Brook is one of the places in Surrey where we work for thermal roof surveys. There’s also a page for Guildford.

Every address in GU8 is covered for thermal roof surveys. If you need a thermal roof survey at a property on Brook Road, Church Lane and Park Lane or anywhere close by, we can survey it. We also cover the places around Brook: Sandhills (1 mile east), Wormley (1 mile east), Bowlhead Green (1 mile west), Witley (2 miles north-east) and Hambledon (2 miles east). We also work in nearby towns like Guildford (9 miles north-east), Woking (13 miles north), Camberley (14 miles north), Farnham (8 miles north-west), Frimley (13 miles north) and Haslemere (4 miles south-west).

Near you in Brook

Typical jobs here are in homes near Rodborough and Dog And Pheasant Public House and the streets around them. Brook’s nearest station is Witley station, roughly 1 mile east of the centre. A little further out are Milford Hospital (3 miles north-east). The countryside around Brook includes Gibbet Hill and Upper Lake.

Map of Brook © OpenStreetMap contributors

Roof by roof

Felt and asphalt flat roofs

Felt and asphalt sit tight to the layers below, which often helps the camera pick up differences. Any patterns are checked with moisture readings.

Single-ply and EPDM roofs

On big single-ply roofs, the camera helps show where to take readings. It focuses the survey on the areas that matter.

What a thermal roof survey doesn’t cover

Our findings are based on what we can see safely on the day, so some things are outside what a survey can do:

  • What’s inside walls or under coverings, without opening up
  • Clear results when the conditions on the day are poor
  • Seeing water directly, as the camera shows temperature, not moisture

Not sure which survey suits your roof? You can ring 07833 053749 or send us an email and we’ll tell you. What a survey covers and doesn’t.

Roof types and parts we check

  • Insulated roof spaces
  • Loft conversions
  • Pitched roof slopes
  • Flat roofs
  • Ceilings below the roof
  • Commercial roofs

Your questions about thermal roof surveys in Brook

Is Brook within the area you cover?

We do. A small place gets exactly the same survey as a big one, with the route planned beforehand.

Is my home in Brook listed or in a conservation area?

Historic England’s list shows listed buildings, and the local council can tell you about conservation areas. If a home is listed, changes that affect its special interest need listed building consent, and in a conservation area re-roofing in different materials may need permission.

How long is the visit?

It normally takes roughly 1–2 hours at a house, including the thermal images, and around 3–4 hours for a commercial roof. You’ll then get the report by email.

Can a thermal survey trace a roof leak?

It often helps show where to look. Patterns can suggest where trapped water has spread. It’s used alongside a close inspection and moisture readings, as the camera alone cannot prove a leak.

What does a thermal roof survey show?

The images show how warm or cool each part of the surface is. Unusual patterns can point to trapped water, gaps in insulation or heat escaping, and we check them with moisture readings.

What conditions are best for thermal imaging?

Conditions on the day affect the results. A sunny day beforehand, a dry surface and calm air all help. Rain and strong wind can make the images less clear, so we talk through the forecast as you book.

Do you survey roofs on blocks of flats?

Yes. A shared roof needs access agreed first. Mention it when you get in touch and we will explain what’s needed.

20+ yearsRoof survey experience
5,000+ surveys98% customer satisfaction
Drones and thermal imagingCAA-registered drone operator
Fully insuredProfessional indemnity and public liability
Reports from £150Prices include VAT