Hampshire · London and the South East
Thermal imaging roof survey in Lymington, Hampshire
Independent thermal roof surveys in Lymington. We have completed more than 5,000 surveys across London and South East England.
- Leaks that are hard to trace
- Heat escaping through the roof
- Damp that repairs haven’t cured
Thermal roof survey in Lymington: what you get
Thermal imaging is a useful tool, but it has limits. It shows surface temperature, and things like sun, shade, reflections and wind all affect the readings. We back up the images with moisture readings and a careful look at the roof. Our report says plainly what the camera picked up and how sure we can be. Where something can’t be confirmed, we say what would help next. Common reasons to book are possible trapped moisture under a flat roof covering and gaps in loft insulation, across flat roofs, commercial roofs and pitched roof slopes.
Before any drone flight in a town like Lymington, the airspace is checked on the Drone Safety Map, including zones around airports and prisons. Our drone weighs under 250g, and we’re a CAA-registered drone operator (Flyer ID and Operator ID). We take care over neighbours’ privacy. In the open category, flights stay under 120 m (400 ft) with the drone in sight.
If any part of the roof couldn’t be seen safely, we say so in the report. That way, it is clear what was covered and what wasn’t.
- Place
- Lymington (SO41)
- Region
- Hampshire
- Prices
- From £400 inc. VAT
- Your report
- A written report with photos, by email
- Appointments
- Monday to Sunday, daytime
- Insurance
- Professional indemnity and public liability
- Phone
- 07833 053749
- Page updated
- 27 October 2026
What a thermal roof survey does not cover
Some things cannot be seen without opening up the roof, so a survey has limits:
- Seeing water directly, as the camera shows temperature, not moisture
- The condition of timbers we can’t see
- Clear results when the conditions on the day are poor
If you are not sure which survey you need, call 07833 053749 or drop us an email and we’ll give you a straight answer before you book. What a survey covers and does not.
Roof types and parts we check
- Pitched roof slopes
- Loft conversions
- Insulated roof spaces
- Ceilings below the roof
- Flat roofs
- Commercial roofs
Before and after the survey
Over many surveys, some simple habits stand out as worth the effort:
- Tell us where and when you’ve seen damp or stains
- Photograph damp patches with the date
- Don’t climb onto the roof to look for leaks yourself
- Move stored items away from the loft hatch
Many people send the report to roofers, who can then quote for the areas shown. Each thermal image is matched to a normal photo, so the areas are easy to locate.
Watch for new damp patches on ceilings beneath the roof. Early action keeps insulation from staying wet.
Airspace, weather and Lymington roofs
Lymington is within about 1 mile of the coast. Clear thermal results need a dry roof and little wind after a sunny day, so the date depends on the forecast. A number of Hampshire villages keep thatched roofs on their older buildings. Older houses in the South East often have slate or clay tile roofs, while many later estates have concrete tiles. Older coverings on steep or tall roofs are hard to judge from below, so close-up aerial photos and thermal images help.
Hotels and guest houses near Lymington can’t easily close rooms for a leak, so it pays to find faults before guests do. If you look after a building such as Lymington Junior School, thermal images can show where wet insulation sits under a big flat roof. If your home is one of the older ones in the streets near Church of St. Thomas the Apostle, steep roofs, tall chimneys and hidden valleys can be hard to see from the ground, and that is where a view from the air or with a thermal camera helps.
Lymington is in Hampshire. We survey roofs in Lymington as part of our work across London and South East England. Across Hampshire, we cover Lymington. For surveys nearby, see our Southampton page.
Here we cover the SO41 postcode area for thermal roof surveys. Local streets include High Street, The Square and Priestlands Place, all of which we cover. With the A337 and B3054 close by, Lymington is simple for us to get to. If you are just outside Lymington, we cover Pennington (1 mile south-west), Walhampton (1 mile east), Lower Pennington (1 mile south), Warborne (1 mile north) and Boldre (2 miles north). Larger places within reach include Totton (11 miles north), Hedge End (15 miles north-east), Hythe (10 miles north-east), New Milton (5 miles west), Ringwood (12 miles north-west) and Locks Heath (14 miles north-east).
Local landmarks in Lymington
In Lymington, that means homes and buildings near Southlands School, Priestlands School and Thomas Tripp pub, among other places. For rail, the closest station is Lymington Town station, about 0.6 miles north-east. A little further out are Lymington New Forest Hospital (0.9 miles north) and St Barbe Museum and Art Gallery (under half a mile north-east). Green spaces nearby include Lymington and Keyhaven Marshes Nature Reserve.
What happens on the day
Before we start, let us know why you’ve booked: a purchase, a leak, a storm, new work or simply peace of mind. That way we can focus on what matters to you. Most visits take between one and two hours for most homes, plus time to check any thermal findings with moisture readings. A typical visit in Lymington begins with the street side of the roof and then moves round the building. The back garden is frequently where extensions, dormers and rear slopes are best seen, so unlocked gates help. The loft comes next, where there is safe access.
- First we discuss the roof, any damp and the forecast for the visit.
- The roof is inspected visually from safe positions.
- We take thermal images of the roof and of the loft where we can reach it.
- We take moisture readings where the images suggest a problem.
- Each image is set beside a normal photo and explained in the report.
How to prepare
- Check we can get to the back of the property
- Mention any parking restrictions on your street
- Find any records of previous roof work
Book a survey
Buyers should book once an offer has been accepted, so there is time to use the report before exchange. For any other survey, just call 07833 053749 or email us when you are ready.
Advice
What you can safely check yourself
A lot can be seen from ground level. With binoculars, look for slipped or missing slates and tiles, gaps along the ridge and leaning chimneys. Never climb onto the roof to look.
Your own check is a good start, but it is not a survey. From the ground, valleys, flashings and the backs of chimneys are often out of sight.
What we look for on each type of roof
Single-ply and EPDM roofs
On big single-ply roofs, the camera helps show where to take readings. That makes the survey more focused.
Pitched slate and tile roofs
Even on pitched roofs, the camera can point to heat loss and some damp. We explain what can and can’t be read from them.
Landlords, agents and block managers in Lymington
Surveys can also be booked by buyers’ agents acting for a client. The report is emailed, so it can go straight to your client, photographs included.
Where a roof is shared: access has to be agreed with whoever owns or manages the building. Let us know about it when booking and we’ll plan the visit with that in mind.
Your questions about thermal roof surveys in Lymington
Does a conservation area affect roof work in Lymington?
The council and Historic England’s list are the places to check. It’s worth checking before planning roof work, as both can affect what’s allowed.
Is Lymington in the area you cover?
Yes, Lymington is within the area we cover. We work right across London and South East England. Just ring 07833 053749 or drop us an email and let us know about the property.
Do you climb onto every roof?
Only if it’s safe. We look at everything that can be seen safely: from the ground, from windows, from inside the roof space, from the roof where it’s safe and by drone where it applies. The report says if anything couldn’t be seen.
Will thermal imaging find my leak?
It can help narrow down where water may be getting in. Patterns can suggest where trapped water has spread. It is used alongside a close inspection and moisture readings because the camera can’t confirm water on its own.
How long is the visit?
Most surveys take roughly 1–2 hours for most homes, plus time to check any thermal findings with moisture readings. We will confirm the timing as you book.
Does thermal imaging detect leaks directly?
Thermal imaging shows temperature rather than water. Wet insulation holds heat longer than dry, so it can stand out, and moisture readings are used to check it.
What do I do with the report?
You receive the written report by email, with photographs and recommendations. You can use it to talk to a seller, an insurer, a roofer or a managing agent, whichever applies.