Oxfordshire · London and the South East
Thermal imaging roof survey in Barton, Oxfordshire
We take a careful look at the roof at your property in Barton, and put it all in a report with photographs.
- Heat escaping through the roof
- Wet areas near outlets and upstands
- Ceilings that feel colder in places
Thermal roof survey in Barton: what you get
On a flat roof, wet insulation holds heat longer than dry insulation. So a wet patch can show as a warmer or cooler area on the camera. This can give an idea of how far water has travelled beneath the membrane, something you cannot normally tell from the surface. Moisture readings are then used to check what the camera suggests. Common reasons to book are damp patches with no obvious cause and patches of heat loss across the roof, on commercial roofs, loft conversions and insulated roof spaces.
In smaller places like Barton, many homes are bungalows and houses with roofs you can partly see from ground level. Chimney tops, valleys and rear slopes are where close-up or thermal images help most. The forecast decides the day, as calm, dry conditions suit both. Close-up images frequently show wear on ridges, verges and flashings that can’t be judged properly from the ground.
The report is written in plain words, so it makes sense without any roofing background. Photos show what each point refers to, with the urgent items made clear.
- Where
- Barton (OX3)
- Wider area
- Oxfordshire
- Cost
- From £400 inc. VAT
- Reports
- A written report with photos, by email
- Appointments
- Weekdays, Saturdays and Sundays
- Insured
- PI and public liability insurance
- Call
- 07833 053749
- Updated
- 27 October 2026
How the survey works
The visit has one job: to see as much of the roof as can safely be seen and record it clearly. Everything we note and photograph goes into the written report. It normally takes about one to two hours for a house, while a commercial roof takes nearer three to four hours. A visit to a smaller place like Barton is no different on the day: outside, inside and from any safe vantage point, in that order. Point out any stains, cracks or loose pieces you’ve spotted.
- You tell us about the roof and any damp, leaks or cold rooms.
- The weather and surface conditions are recorded.
- A full inspection and thermal imaging are carried out together.
- Moisture readings are used to check what the camera shows.
- You get the report the same day, with an in-person consultation to follow.
Getting ready for the survey
- Keep pets inside or away from the areas we’re looking at
- If it isn’t your property yet, arrange access through the agent
- Let us know where we can park nearby
Book a survey
Our price is from £400, including VAT. What you pay depends on the roof’s size, access and the package, so ring 07833 053749 or use the contact form with the details.
Read more
Nearby places to Barton
More services for Barton
Drones, thermal imaging and Barton roofs
Historic houses like Holywell Manor, about 2.3 miles west, show how far back building in the area around Barton goes. If you own one of the older houses, expect a mix of original materials and later repairs on the roof, and any change of roofing material on a listed home needs checking with the council first. If your survey includes the drone, we check the Drone Safety Map for restrictions before flying.
Shop and office owners around Templars Square may find that a commercial roof can be photographed from above without anyone walking on it. Take a building like Bayards Hill School: thermal images can show where wet insulation sits under a big flat roof. For an older house near a landmark such as Parish Church of St Mary, tall stacks and steep slopes are easier to judge with close-up aerial photos than from the pavement.
Barton is about 2 miles north-east of Oxford, in Oxfordshire. Whether the building in Barton is a house, a flat or a commercial unit, we can survey the roof on a weekday or at the weekend. Across Oxfordshire, we cover Barton.
Here we cover the OX3 postcode area for thermal roof surveys. We cover properties on Pitts Road, Routh Road and Green Road and the roads around them. We also cover the places around Barton: Risinghurst (1 mile south-east), Shotover Hill (1 mile south), Stanton St John (2 miles north-east), Forest Hill (2 miles east) and Beckley (2 miles north). Larger places within reach include Didcot (11 miles south), Bicester (9 miles north), Abingdon-on-Thames (7 miles south-west), Witney (13 miles west), Thame (10 miles east) and Grove (15 miles south-west).
Around Barton
Around Barton, our work takes us to homes and buildings near The Six Bells pub, Holy Trinity Church and Headington Quarry Foundation Stage School and the streets around them. Other local landmarks include Cheney School (1.5 miles south-west) and Bury Knowle Park (0.7 miles south-west). For rail, the closest station is Oxford station, roughly 3.3 miles west of the centre. Other landmarks nearby include Templars Square (2.6 miles south) and Rumble Museum (1.5 miles south-west). For a walk, there is CS Lewis Nature Reserve and Shotover.
Prices for thermal roof surveys in Barton
Not every roof costs the same to survey, for these reasons:
- Chimneys, valleys, parapets and other details
- The number of roofs, including extensions and garages
- Basic, Standard or Premium
- If the survey needs thermal imaging or a drone
One thing that affects the price is the package: Basic from £150, Standard from £250 or Premium from £400, all inc. VAT. The roof’s size, height and access matter as well.
Helping us price your survey
We will typically ask about:
- The address and postcode of the property
- Access details, such as a loft hatch or a shared roof
- Any stains, drips or damp patches you’ve seen indoors
- Pictures of the roof from a safe spot, if you have them
Booking is simple: just call 07833 053749 or use the contact form, let us know about the property and we’ll point you to the right survey. We confirm the price before anything is booked.
Barton: your questions answered
Will you come out to Barton?
Yes, Barton is on our map. Villages and rural addresses get the same survey as a town house.
Does a conservation area affect roof work in Barton?
You can check whether a building is listed on Historic England’s list, and your council can tell you if it is in a conservation area. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material.
What do I do with the report?
You’ll receive the report by email, and you decide the next step: raise it with a seller, send it to an insurer, brief a roofer or share it with a managing agent.
How long is the visit?
Time on site depends on the roof; most visits take an hour or two for most houses, with bigger or more complicated roofs taking longer. The report is sent afterwards by email.
Which days do you carry out surveys?
We carry out surveys on weekdays and at weekends. To arrange a date, phone 07833 053749 or send us an email.
Does thermal imaging work on slate and tile roofs?
It can show heat loss and some damp, but it has more limits there. Our report is clear about what can be read from them, and back them up with a visual inspection and moisture readings.
Do you climb onto every roof?
Only if it is safe. We look at everything that can safely be seen: from ground level, from windows, from inside the roof space, from the roof where it’s safe and by drone where it applies. Anything we cannot see is noted in the report.
Landlord and commercial surveys in Barton
Landlords, agents and building managers in Barton and across Oxfordshire can book any of our surveys. For a price for a let property or a block, call 07833 053749 or email us.
We also survey roofs for businesses and commercial landlords, including offices, shops and units. Larger roofs take longer.
Why act early in Barton
Wet insulation under a flat roof doesn’t dry out on its own while the covering stays on. Over time, it insulates less well and can harm the deck. Finding the wet areas sooner keeps the work smaller. In an older home around Barton, water from a roof defect can get into timber and plaster, which is far harder to put right than the roof fault itself.
There are three survey packages: Basic from £150, Standard from £250 and Premium from £400, all with VAT included. What your roof costs depends on its size, access and what you want to find out.
Why book with us
- Insured for professional indemnity and public liability
- A written report with photos
- Customer satisfaction of 98%
- Drone flown under a CAA Flyer ID and Operator ID
Take a look at what a roof survey costs and two real surveys.
What this survey cannot tell you
Our findings are based on what we can see safely on the day, so there are some things a survey cannot cover:
- Seeing water directly, as the camera shows temperature, not moisture
- What’s inside walls or under coverings, without opening up
- Reliable images in rain, strong wind or on a wet roof surface
Not sure which survey suits your roof? You can phone 07833 053749 or email us and we will tell you before you book. What our survey covers.
What we look at
- Pitched roof slopes
- Commercial roofs
- Loft conversions
- Ceilings below the roof
- Flat roofs
- Insulated roof spaces
Can I check my roof myself?
You can learn a lot from the ground. Binoculars help you spot slipped slates or tiles, gaps along the ridge and a leaning stack. Never climb onto the roof to look.
Fresh stains on ceilings or walls after rain are worth noting. Photograph them and note the date, which helps when we check the roof.