Oxfordshire · London and the South East
Thermal Roof Survey in Kingston Stert
Independent thermal roof surveys in Kingston Stert. We’ve completed more than 5,000 surveys across London and South East England.
- Possible trapped moisture under a flat roof covering
- Leaks that are hard to trace
- Damp that repairs haven’t cured
Thermal roof survey in Kingston Stert
Your report sets out the thermal images alongside ordinary photographs, making it clear where on the roof each pattern is. Each one comes with an explanation, the moisture readings and our recommendation. Premium reports are sent the same day. If you have questions, the in-person consultation gives you time to go through them. There’s a 12-month follow-up as well. We survey ceilings below the roof, loft conversions and flat roofs, and people most often book us about leaks that are hard to trace and water getting in at parapets and stacks.
In a small place like Kingston Stert, open ground can mean strong wind. Strong wind or a downpour stops a small drone flying, and calm conditions also suit thermal imaging best. We plan the journey, access and timing around the weather. A change in the forecast can mean moving the visit to another day.
The report works through the roof section by section, from the main slopes down to the gutters and outlets. You’ll see the good as well as the bad.
- Where
- Kingston Stert (OX39)
- Wider area
- Oxfordshire
- Price
- From £400 inc. VAT
- Your report
- Emailed report with photos and recommendations
- When we survey
- Weekdays, Saturdays and Sundays
- Insured
- Professional indemnity and public liability
- Phone
- 07833 053749
- Page updated
- 27 October 2026

Before and after the survey
Most of what helps is simple and safe from ground level. A few suggestions:
- Take photos of stains as they appear, so we can compare
- Keep a record of when stains appear
- Clear leaves from outlets and gutters each autumn
- Check from the ground or a window, never by climbing
Premium Surveys include an in-person consultation, giving you the chance to talk through the images and findings. There is a 12-month follow-up too.
Check that loft insulation is laid evenly and hasn’t been pushed aside. Gaps frequently appear after work in the loft.
What happens on the day
A survey visit follows a simple order: we listen to what’s been worrying you, inspect the roof from every safe vantage point, take photographs as we go and record our findings for the written report. It typically takes roughly 1–2 hours for a house, and longer for a large or complex roof. Older rural homes like those around Kingston Stert can have a main roof, lower lean-to roofs and outbuildings all joined together. Each part is looked at from wherever it can be seen safely.
- We start with the roof, its history and any signs of damp or heat loss.
- We check the conditions and note how they may affect the images.
- A full inspection and thermal imaging are carried out together.
- Moisture readings are used to check what the camera shows.
- The Premium report reaches you the same day, and we go through it with you in person.
Before the survey
- Have keys ready for side gates, garages or roof access doors
- Dig out any old roof reports or invoices
- If the roof is shared, arrange access with whoever manages the building
Getting a price
For a price for thermal roof surveys in Kingston Stert, call 07833 053749 or send us an email. The address, the type of property and what you want to find out help us price the survey accurately.
Read more
Also in Kingston Stert
Different roofs, different checks
Loft insulation
Insulation frequently gets moved during work in the loft. The camera can show where it no longer covers the ceiling.
Single-ply and EPDM roofs
Single-ply PVC, TPO and EPDM roofs are often laid over insulation boards. Wet boards can show as temperature differences on the images.
Thermal roof surveys in Kingston Stert: local notes
With Adwell House about 2.1 miles south-west, Kingston Stert sits in an area with a long building history. Older homes in the wider area often have features worth a closer look, such as lead valleys, tall stacks and roofs that have been patched over the years, and any change of roofing material on a listed home needs checking with the council first. Older buildings in west Oxfordshire often have Cotswold stone slate roofs, and some Oxfordshire villages still have thatch. Slate and clay tile are the usual coverings on older South East houses, with concrete tiles on many later estates. Where a roof is steep, tall or hard to see from the ground, drone photos and thermal images add detail.
For site and facilities teams at buildings such as Aston Rowant Church of England Primary School, a drone or thermal camera can show a large roof in a single visit.
Kingston Stert is about 3 miles south of Thame, in Oxfordshire. We provide thermal roof surveys for homeowners, landlords and businesses in Kingston Stert. Our area takes in places right across Oxfordshire, large and small. You can also see our page for Oxford.
Surveys in OX39 work the same way as everywhere else we cover. Other places close to Kingston Stert include Sydenham (1 mile north-east), Emmington (1 mile north-east), Chinnor (2 miles east), Towersey (3 miles north) and Thame (3 miles north). Further out, we also cover Oxford (13 miles west), Didcot (14 miles south-west), Abingdon-on-Thames (14 miles west), Henley-on-Thames (12 miles south), Benson (9 miles south-west) and Headington Quarry (11 miles west).
Around Kingston Stert
In Kingston Stert, that means homes and buildings near The Crown Inn and the streets around them. The closest station to Kingston Stert is Princes Risborough station, about 4.6 miles east of the centre. A little further out are Thame Museum (3.5 miles north-west) and Thame Community Hospital (3 miles north). Open spaces near Kingston Stert include Bald Hill and Oakley Hill nature reserve.
When to book a survey in Kingston Stert
On big commercial and residential flat roofs, thermal imaging helps owners plan. Patterns can point to wet areas and show which parts look sound, so we know where to take moisture readings.
People typically book a survey when they’ve noticed one of these:
- Leaks that are hard to trace
- Thin or uneven insulation in the roof
- Stains that keep coming back
- Cold spots on ceilings under the roof
Take an older house close to Church of St Mary: tall stacks and steep slopes are easier to judge with close-up aerial photos than from the pavement.
Before booking any roof surveyor
- What’s outside the scope of the survey
- Whether the price includes VAT
- Whether you can ask questions once you have the report
- Their report turnaround times
What a thermal roof survey doesn’t cover
This is not a RICS building survey, a structural engineer’s report or an asbestos survey. Other limits to bear in mind:
- A formal energy assessment
- Clear results when the conditions on the day are poor
- Whether the deck or roof structure is strong enough
If in doubt, call 07833 053749 or send us an email and we will recommend the right survey. What a survey covers and doesn’t.
Roof types and parts we check
- Loft conversions
- Ceilings below the roof
- Pitched roof slopes
- Insulated roof spaces
- Flat roofs
- Commercial roofs
Your questions about thermal roof surveys in Kingston Stert
Does a conservation area affect roof work in Kingston Stert?
Your council is the best source, with Historic England’s list for listed buildings. Both listing and conservation areas can limit changes of roofing material, and councils can also use Article 4 directions.
Is Kingston Stert within the area you cover?
Yes, we do. Our area covers London and South East England, and smaller places are part of that. Longer journeys are simply planned ahead of time.
When does the report arrive?
The Premium Survey report comes the same day, the Standard within 24–48 hours and the Basic within 48 hours. All of them come by email.
How much does a thermal roof survey cost?
It’s part of the Premium Survey, from £400. An in-person consultation and a follow-up 12 months later are included too. For bigger commercial roofs, we quote on size.
Is thermal imaging good for finding leaks?
It can help narrow down where water may be getting in. Water can travel under a covering before it shows inside, and temperature patterns can help follow it. It is used alongside a close inspection and moisture readings because the camera can’t confirm water on its own.
What happens next?
You will get the report by email, with photographs and clear recommendations. With Standard there’s a follow-up consultation; with Premium, an in-person consultation, so you can talk the findings through.
How long does the survey take?
It usually takes about 1–2 hours for most homes, plus time to check any thermal findings with moisture readings. You will then get the report by email.
Why get it checked now?
Without thermal imaging, the only way to see how far water has spread is often to open up the roof. That helps you and your roofer decide what really needs replacing. Older and listed buildings around Kingston Stert may need consent and matching materials for repairs, so a defect found early gives time to plan the work properly.
For a price for your roof in Kingston Stert, phone 07833 053749 or send us an email and tell us about the roof. We’ll confirm the figure before booking.
What you get with us
- Every finding written up with photos
- Prices that include VAT
- 5,000+ surveys completed
- Thermal imaging and drone inspection where they help
Read what a roof survey costs or our case studies.