Roof surveys across London and the South East 07833 053749info@independentroofsurvey.co.uk

Greater London · London and the South East

Thermal imaging roof survey in Battersea, Greater London

Not sure what state the roof is in? You can book a thermal roof survey in Battersea and across Greater London, with plain-English findings.

  • Thin or uneven insulation in the roof
  • Areas losing heat at the eaves and junctions
  • Damp where roofs meet walls and chimneys

Thermal roof surveys in Battersea

What happens on the day

Photographs are taken throughout the visit, so you can see in the report what we found and where. Close-ups come from the safest viewpoint available, including by drone where it’s applicable and the weather allows. Most surveys take between one and two hours for most homes, plus time to check any thermal findings with moisture readings. For a visit in Battersea, parking and access are the things to plan: let us know about parking, the floor the property is on, any shared entrance and loft access. On the day, the roof is looked at from the ground, from windows, from inside the roof space and from the roof where it’s safe.

  1. You let us know about the roof and any damp, leaks or cold rooms.
  2. The weather and surface conditions are recorded.
  3. We inspect the roof and take thermal images during the same visit.
  4. Moisture readings are used to check what the camera shows.
  5. You get the report the same day, with an in-person consultation to follow.

Getting ready for the survey

  • Mention any parking restrictions on your street
  • If the roof is shared, arrange access with whoever manages the building
  • Clear the way to the loft hatch

Booking a survey

When you’re ready to go ahead, phone 07833 053749 or send us an email. We will suggest a package, agree the price and find a date, weekday or weekend.

Book your survey

Related advice

Thermal roof survey in Battersea: what you get

Thermal imaging is frequently most useful on flat roofs, from small extensions to large commercial roofs. Patterns can suggest where water is trapped under the covering. Pitched roofs with slates or tiles are often harder to read, because of the air space beneath, so we also look from the loft where we can reach it safely. Typical surveys look at areas losing heat at the eaves and junctions and areas of a flat roof that may hold water, across pitched roof slopes, insulated roof spaces and ceilings below the roof.

London’s roofs are often hard to see from the street: valley gutters behind parapets, dormers and flat-roofed rear additions. Drone photos and thermal images can show parts of a roof that are hard to reach safely. The weather decides the day: both drones and thermal cameras need the right conditions. Thermal images show surface temperature, not water itself, so findings are checked with moisture readings.

Where we cannot see part of the roof, the report says so. You will know exactly what was inspected and what wasn’t, and what we’d suggest next.

Illustration of a report page showing two roof pictures and notes
Where
Battersea (SW11, SW18, SW4)
Region
Greater London
Cost
From £400 inc. VAT
Reports
Emailed report with photos and recommendations
Survey days
Weekdays, Saturdays and Sundays
Insurance
PI and public liability insurance
Phone
07833 053749
Last updated
27 October 2026

Different roofs, different checks

Felt and asphalt flat roofs

Felt and asphalt roofs frequently show wet areas as patches that differ from the rest. Moisture readings are used to check them.

Single-ply and EPDM roofs

Thin membranes can show patterns from the layers beneath. Reflections from shiny surfaces can affect readings, which we allow for.

Tips from our surveys

Nothing here needs a ladder. A few suggestions:

  • Check outlets after heavy rain
  • Use the report as a baseline for later checks
  • Note where damp appears and after what weather
  • Clear a path to the loft hatch before we arrive

Many people send the report to roofers, who can then quote for the areas shown. Each thermal image is matched to a normal photo, so the areas are easy to locate.

After repairs or a new covering, a later survey can confirm things are dry in suitable weather.

Your questions about thermal roof surveys in Battersea

Is my home in Battersea listed or in a conservation area?

You can check whether a building is listed on Historic England’s list, and your council can tell you if it’s in a conservation area. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material.

Is parking a problem for a survey in Battersea?

It depends on the street. If Battersea has controlled parking where you are, a visitor permit is the easiest answer, and a driveway is even better.

Is this a RICS survey?

No. We are experienced roof surveyors, and our survey covers the roof rather than the whole building. If you need a full building survey, you’ll need a RICS survey as well.

What’s the best way to book?

Simply ring 07833 053749 or email us with the address. After a few questions, we confirm the price and fix a day.

How soon will I get the report?

That depends on the survey you book: the Basic Survey report arrives within 48 hours, the Standard Survey in 24 to 48 hours and the Premium Survey the same day. Reports are sent by email.

What conditions are best for thermal imaging?

Conditions on the day affect the results. It works best after a sunny day, with a dry roof surface and little wind. Rain, wind and heavy cloud can weaken the patterns, so we talk through the forecast as you book.

Is thermal imaging included in your surveys?

It comes with our Premium Survey, which starts from £400. That also includes a full inspection, a drone inspection where applicable, structural analysis and a same-day report.

Thermal roof surveys in Battersea: local notes

Within a mile and a half or so of Battersea there are several hotels, and like offices and blocks, hotels frequently sit under flat roofs. For hotels and other commercial buildings, large roofs are where aerial photos and thermal images show the most at once. The wider area around Battersea has a long history of building, with Carlyle's House about 1.4 miles north. On older houses around here, roofs frequently carry the marks of earlier repairs, from replaced slates to new lead, and the council can say whether a home is in a conservation area.

Controlled parking zones are common in London, so mention any permit rules for Battersea, along with any off-street space. Take a building like Christ Church CofE Primary School: a view from above covers a wide roof far faster than walking it.

Battersea is about 3 miles south-east of Kensington, in Greater London. Bookings from Battersea are handled just like any other: get in touch, agree the price and pick a day. Our Greater London coverage includes Battersea and the places around it.

We survey roofs across SW11, SW18 and SW4 for thermal roof surveys. We offer thermal roof surveys to properties on York Road, Este Road and Home Road. Battersea sits on or near the A3207. We also cover the places around Battersea: Clapham Junction (1 mile north-west), Sands End (1 mile north-west), Chelsea Harbour (1 mile north-west), Wandsworth (1 mile south-west) and Clapham (1 mile east). We also work in nearby towns such as London (4 miles north-east), City of Westminster (4 miles north), Marylebone (4 miles north), Kensington (3 miles north-west), St Pancras (5 miles north-east) and Shoreditch (6 miles north-east).

Near you in Battersea

We work in homes and buildings around The Falcon pub, Emanuel School and Imperial Park. There’s a railway station in Battersea itself: Clapham Junction station. Other landmarks nearby include Baynard's Castle (4.4 miles north-east) and Southside Wandsworth (1.3 miles south-west). The countryside around Battersea includes Henman Hill and Battersea Park Lake.

Map of Battersea © OpenStreetMap contributors

Landlords, agents and block managers in Battersea

Businesses and commercial landlords can book us too. Larger roofs take longer, so they’re priced to suit.

Buyers’ agents can book surveys on behalf of their clients. Reports are emailed, so they’re easy to pass on.

What a thermal roof survey doesn’t cover

Before booking, it is worth knowing what a survey will not do:

  • Readings unaffected by sun, shade or reflections
  • Seeing water directly, as the camera shows temperature, not moisture
  • An energy rating for the building

If in doubt, ring 07833 053749 or email us and we will point you to the right survey before booking. What a survey covers and doesn’t.

What we check

  • Commercial roofs
  • Loft conversions
  • Flat roofs
  • Pitched roof slopes
  • Insulated roof spaces
  • Ceilings below the roof

What we’re asked to look at in Battersea

Some buyers want extra detail before they commit to a purchase. The Premium Survey brings thermal imaging and a drone inspection where applicable, with a report the same day, which helps when timescales are tight.

Problems we come across often include:

  • Moisture around outlets and upstands
  • Damp that repairs haven’t cured
  • Water getting in at parapets and stacks
  • Areas of a flat roof that may hold water

The streets around a church like Clapham Welsh Presbyterian Church are frequently among the oldest in a place, and if you own one of the older houses nearby, steep roofs, tall chimneys and hidden valleys can be hard to see from the ground, and that is where a view from the air or with a thermal camera helps.

Choosing a roof surveyor

  • What happens after the report arrives
  • How they’ll see the roof: from the ground, the loft, the roof or by drone
  • Their insurance cover
  • Whether the roof space is looked at, where there is one

What a good roof survey covers

20+ yearsRoof survey experience
5,000+ surveys98% customer satisfaction
Drones and thermal imagingCAA-registered drone operator
Fully insuredProfessional indemnity and public liability
Reports from £150Prices include VAT