Surrey · London and the South East
Thermal imaging roof survey in Beacon Hill, Surrey
We take a careful look at the roof at your property in Beacon Hill, and put it all in a written report with photographs.
- Moisture around outlets and upstands
- Missing or slipped insulation
- Heat escaping through the roof
Thermal roof survey in Beacon Hill: what you get
Thermal imaging is frequently most useful on flat roofs, from small extensions to large commercial roofs. It can show patterns that point to trapped moisture under the membrane. On pitched roofs, slates and tiles over a ventilated space can hide what’s below, so we also look from the loft where we can reach it safely. We are often asked to look into damp where roofs meet walls and chimneys and cold spots on ceilings under the roof, on pitched roof slopes, ceilings below the roof and commercial roofs.
Older buildings in small places like Beacon Hill may be listed or in a conservation area. Neither a drone survey nor a thermal survey involves any work on the roof, which suits a building where any change needs care. Check with the council before planning any work on a listed building or one in a conservation area.
The report records the roof as we found it on the day. It’s useful straight away, and a good reference for later, such as when you want to compare after future work.
- Location
- Beacon Hill (GU26)
- Wider area
- Surrey
- Price
- From £400 inc. VAT
- Your report
- Written, with photos, emailed to you
- Appointments
- Weekdays and weekends
- Insured
- Professional indemnity and public liability
- Call
- 07833 053749
- Last updated
- 27 October 2026
Roof by roof
Single-ply and EPDM roofs
Because these membranes are thin, patterns from below frequently show. Reflections from shiny surfaces can affect readings, which we allow for.
Loft insulation
In the loft space, the camera can pick up gaps and thin areas of insulation. We look where there is safe access.
What a thermal roof survey looks like in Beacon Hill
Older houses across Surrey often have handmade clay tiles, and many have tile-hanging. Some old buildings in Surrey and Sussex have Horsham stone slab roofs. Many roofs like these can’t be judged properly from the pavement, and that is where a view from above or a thermal image earns its place. England has around 10,000 conservation areas and about 500,000 listed buildings. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material, so the council is the place to ask.
If you look after a building like Beacon Hill Community Primary School, a view from above covers a wide roof far faster than walking it.
Beacon Hill is about 6 miles south of Farnham, in Surrey. Whether the building in Beacon Hill is a house, a flat or a commercial unit, the roof can be surveyed on a weekday or at the weekend. Across Surrey, we cover Beacon Hill. For surveys nearby, see our Guildford page.
We survey roofs across GU26 for thermal roof surveys and the streets around it. Whether your property is on Hill Road, Glen Close and Harlequin Close or anywhere close by, we can help. If you’re just outside Beacon Hill, we cover Whitmoor Vale (1 mile west), Green Cross (1 mile north-west), Grayshott (1 mile south), Hindhead (1 mile south-east) and Barford (1 mile west). We also work in nearby towns such as Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (15 miles north), Farnham (6 miles north), Frimley (13 miles north) and Haslemere (3 miles south-east).
Around Beacon Hill
Locally, jobs take us to homes and businesses close to Woolmer Hill School, St Edmund's School and The Flashes, among other places. The closest station to Beacon Hill is Haslemere station, about 2.9 miles south-east of the centre. Other landmarks nearby include Haslemere and District Hospital (3 miles south-east). Not far away are Gibbet Hill and Upper Lake.
Also near Beacon Hill
More services for Beacon Hill
Common roof problems in Beacon Hill
After a repair, some owners want to know whether the roof has dried out. Thermal images and moisture readings can suggest whether moisture is still trapped when the conditions on the day are suitable.
These are some of the problems a survey can pick up:
- Damp patches with no obvious cause
- Leaks that are hard to trace
- Patches of heat loss across the roof
- Possible trapped moisture under a flat roof covering
Take an older house close to Church of St Alban: steep roofs, tall chimneys and hidden valleys can be hard to see from the ground, and that is where a view from above or with a thermal imager helps.
Questions to ask before booking
- Whether you can ask questions once you have the report
- What insurance they carry
- Whether the inside of the roof is included
- Whether any drone flown is registered with the CAA
Checking the roof from ground level
Look up at the roof after a storm, from the ground: pieces of tile or slate on the ground, a gap in the ridge or a lifted flashing are all worth noting. Leave anything above ground level to a survey.
Watch the gutters in a downpour, from a window or the ground. Water spilling over the edge can be a sign of a blockage or a gutter that has dropped.
Leave it or get it looked at?
Repeated repairs that do not stop a leak are a sign the source hasn’t been traced. Thermal imaging with moisture readings can help narrow it down, instead of trying repair after repair. Matching old materials, such as handmade tiles or stone slates, can take time to source. Spotting a problem early leaves room to find them.
To find out what your survey will cost, phone 07833 053749 or drop us an email with the address and a few details. We will confirm the figure before booking.
Why book us in Beacon Hill
- Packages from £150, including VAT
- Over 20 years’ experience
- An independent look at the roof
- Weekday and weekend surveys
Take a look at our cost guide or two real surveys.
FAQs for Beacon Hill
How do I find out if my home in Beacon Hill is listed?
For listing, use Historic England’s list; for conservation areas, ask the council. It matters most if you are planning to re-roof in a different material.
Will you come out to Beacon Hill?
Yes, we do. We cover the whole of London and South East England, from towns to the smallest villages. Longer journeys are simply planned in advance.
Does thermal imaging detect leaks directly?
Not directly. It shows surface temperature, and wet areas can show up because they hold heat differently. We confirm what it suggests with moisture readings.
Does the report include photos?
Yes, every report has them. Each finding is shown in a picture where possible, so you can see what we mean.
Is this a RICS survey?
No. This is a survey of the roof only, so it’s not a RICS Level 2 or Level 3 survey. Many buyers have both.
Will you fly a drone over my roof?
Where it helps and the rules allow, yes. We hold a CAA Flyer ID and Operator ID and fly a drone under 250g, and the airspace and weather are checked before every flight.
Do you survey roofs on blocks of flats?
Yes, as long as access is agreed. Roofs over flats are often shared, so we need permission from the freeholder or managing agent. We can only inspect what we’re given access to.
What happens on the day
Photos are taken throughout the visit, so you can see in the report what we found and where. We take close-ups from wherever is safe, including by drone where it’s applicable and the weather allows. A typical visit takes between one and two hours at a typical home, or half a day or so for a commercial building. Somewhere like Beacon Hill needs a little journey planning: let us know about lanes, gates and parking. The roof is looked at from the ground, from windows, from the loft where there’s safe access and from the roof where it’s safe.
- First we go over the roof, the problem you’ve noticed and the conditions forecast for the visit.
- We look at the roof from ground level, from windows and from the roof itself where it is safe.
- A thermal camera records how the surface temperature varies across the roof.
- We check the patterns that stand out with moisture readings where there is safe access.
- We write up the thermal images alongside ordinary photos and recommendations.
Preparing for the visit
- Gather any invoices or paperwork from past roof work
- Leave side gates unlocked
- Jot down any questions you want answered
Booking a survey
Surveys can be booked for weekdays, Saturdays or Sundays. To find a date that works for you, phone 07833 053749 or use the contact form with the address and the days you’d prefer.
Advice
Prices for thermal roof surveys in Beacon Hill
What a survey costs depends on the time and equipment it needs. The main factors are:
- Whether it is a home or a commercial building
- The shape of the roof and its details
- Extensions, dormers and garages with roofs of their own
- Height and safe access
A Basic Survey starts from £150, inc. VAT. Standard is from £250 and Premium from £400, both inc. VAT. You will know the exact price before booking.
Booking your survey
What helps most when you contact us:
- Dates you are working to, like exchange
- How the loft is reached, if there is one
- What made you get in touch
- Your postcode, so we can check access and travel
Once you know what you need, phone 07833 053749 or send us an email. We will suggest a package, agree the price and find a date, weekday or weekend.