Kent · London and the South East
Bridge Thermal Roof Survey
Thermal roof surveys in Bridge, with over 20 years’ experience behind it. You get a clear report with photographs.
- Cold areas below the roof
- Wet insulation beneath the membrane
- Damp where roofs meet walls and chimneys
What we do, step by step
Photos are taken throughout the visit, so you can see in the report what we found and where. We take close-ups from wherever is safe, including by drone where it’s applicable and the weather allows. A typical visit takes about one to two hours at a house, including the thermal images, and around 3–4 hours for a commercial roof. Older rural homes like those around Bridge can have a main roof, lower lean-to roofs and outbuildings all joined together. Each part is looked at from wherever it can safely be seen.
- First we discuss the roof, any damp and the forecast for the visit.
- We look over the roof from wherever it is safe.
- Thermal images are taken across the roof and, where there is safe access, in the loft.
- We take moisture readings where the images suggest a problem.
- The report pairs each thermal image with a photo and explains what it suggests.
Before we arrive
- For flats, make sure roof access has been agreed
- If you are buying, check with the agent that we can get in
- Move anything stored under the loft hatch
How to book
For a price for thermal roof surveys in Bridge, ring 07833 053749 or send us an email. The address, the type of property and what you want to find out help us give you an accurate price.
Advice
About our thermal roof survey in Bridge
A thermal survey can point to places where heat is escaping through the roof. Missing or slipped insulation and gaps at the eaves often show up as temperature differences. It works best when the building is heated and it is colder outside. The report shows the images and explains what they may mean. It isn’t an energy rating or a heat loss calculation. We are often asked to look into gaps in loft insulation and wet insulation beneath the membrane, across insulated roof spaces, loft conversions and ceilings below the roof.
Older buildings in small places like Bridge may be listed or in a conservation area. Neither a drone survey nor a thermal survey involves any work on the roof, so it’s a gentle way to see the condition of an old roof, before anyone decides what work it needs. Changes that affect a listed building’s special interest need listed building consent, so check with the council first.
The Standard Survey adds moisture detection, a structural check and a follow-up consultation. The Premium Survey adds thermal imaging, drone inspection where it applies, structural analysis and an in-person consultation.
- Place
- Bridge (CT4)
- Region
- Kent
- Prices
- From £400 inc. VAT
- Report
- Written, with photos, emailed to you
- Appointments
- Monday to Sunday, daytime
- Cover
- Professional indemnity and public liability
- Phone
- 07833 053749
- Page updated
- 27 October 2026
Common roof problems in Bridge
After a repair, some owners want to know whether the roof has dried out. A thermal survey with moisture readings can show whether wet areas remain when the conditions on the day are suitable.
Common reasons to book include:
- Damp around roof outlets and upstands
- Areas of a flat roof that may hold water
- Water that travels before it shows
- Damp that repairs haven’t cured
Goodnestone Park, about 4.4 miles east, is one of the historic houses in the wider area around Bridge. For older roofs nearby, a look from above or with a thermal imager is a hands-off way to check condition.
What to check before booking
- How soon the report will arrive
- Will they check the loft as well as the outside?
- How long they’ve been surveying roofs
- Are they insured for the work?
What a thermal roof survey looks like in Bridge
Older houses across Kent often have handmade clay or peg tiles, and many have tile-hung walls. Kent’s older buildings take in oast houses and timber-framed Wealden hall houses as well. Many roofs like these cannot be judged properly from the pavement, and that’s where a view from above or a thermal image earns its place. Where the drone is part of the survey, we check the Drone Safety Map for restrictions before flying.
If you run a business near Whitefriars Shopping Centre, thermal images can show trapped moisture across a wide commercial roof. Anyone responsible for a site like Bridge and Patrixbourne Church of England Primary School will know that thermal images can show where wet insulation sits under a big flat roof.
Bridge is about 3 miles south-east of Canterbury, in Kent. Roofs in Bridge get the same thorough look as anywhere else in Kent. Our area takes in places right across Kent, large and small.
We cover every part of CT4 for thermal roof surveys and the streets around it. Streets in the area include High Street, Station Road and Western Avenue. If you are just outside Bridge, we cover Patrixbourne (1 mile north-east), Bishopsbourne (1 mile south), Bekesbourne Hill (1 mile north-east), Bekesbourne (1 mile north-east) and Kingston (2 miles south-east). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (3 miles north-west), Margate (15 miles north-east), Dover (11 miles south-east), Folkestone (11 miles south) and Ramsgate (14 miles north-east).
Local landmarks in Bridge
Around Bridge, our work takes us to homes and buildings near The Bridge Arms and St. Anselm's Catholic School and the streets around them. For rail, the closest station is Bekesbourne station, roughly 1.2 miles north-east of the centre. A little further out are Canterbury Roman Museum (2.9 miles north-west) and Kent and Canterbury Hospital (2.1 miles north-west). Green spaces nearby include Blean Woods RSPB Reserve.
Towns and villages near Bridge
What else we do in Bridge
Checking the roof from ground level
During heavy rain, look at the gutters from the ground or a window. Water spilling over the edge can be a sign of a blockage or a gutter that has dropped.
What you cannot do safely is get up close. Roofs are fragile and slippery, and a fall can be serious. That part is for a survey, using safe viewpoints and a drone where it applies.
What a thermal roof survey doesn’t cover
Before booking, it is worth knowing what a survey won’t do:
- A formal energy assessment
- Structural calculations, which need a structural engineer
- Hidden layers that need to be opened up to check
If you are not sure which survey you need, ring 07833 053749 or send us an email and we will give you a straight answer. The full list of what we check.
What this survey covers
- Pitched roof slopes
- Commercial roofs
- Ceilings below the roof
- Insulated roof spaces
- Flat roofs
- Loft conversions
Questions from Bridge
Will you come out to Bridge?
Yes, Bridge is covered. We work right across London and South East England, and smaller places are part of that. Longer journeys are simply planned beforehand.
Is my home in Bridge listed or in a conservation area?
The council and Historic England’s list are the places to check. It is worth checking before planning roof work, as both can affect what’s allowed.
How do I arrange a thermal roof survey in Bridge?
Simply call 07833 053749 or email us with the address. After a few questions, we confirm the price and fix a day.
Will the survey show heat loss through my roof?
Thermal images can suggest where heat is escaping and where insulation may be missing. The survey is not an energy rating or a heat loss calculation, but the images show where improvements may help.
Can you use a thermal camera on a sloping roof?
It can be useful, though pitched roofs are usually harder to read. The air space under slates and tiles can hide patterns, so we combine it with an inspection from the loft where there is safe access.
Do you climb onto every roof?
Not always. Some roofs are too steep or fragile to walk on safely. Safe viewpoints, the loft and a drone where applicable let us see the rest, and the report records anything we couldn’t see.
What does the report include?
It explains what we saw, what it means and what we’d suggest, backed by photos. Anything we couldn’t see safely is noted too.
Rented homes, blocks and businesses
For blocks of flats, a roof survey helps managing agents and residents’ management companies plan ahead. Recommendations are set out in order of urgency where relevant, which helps when budgeting.
Any of our surveys can be booked by landlords, agents and building managers in Bridge. For a price for a let property or a block, call 07833 053749 or email us.
How the survey changes by roof type
Loft insulation
Insulation often gets moved during work in the loft. Thermal images can show where it has been pushed aside.
Pitched slate and tile roofs
From inside the loft, the camera can help with damp around chimneys, valleys and roof windows. Findings are checked with moisture readings.