West Sussex · London and the South East
Thermal imaging roof survey in Ferring, West Sussex
Not sure what state the roof is in? We carry out thermal roof surveys in Ferring and across West Sussex, with plain-English findings.
- Wet areas near outlets and upstands
- Thin or uneven insulation in the roof
- Heat escaping through the roof
Thermal roof survey in Ferring: what you get
Thermal imaging is often most useful on flat roofs, from small extensions to large commercial roofs. Patterns can suggest where water is trapped under the covering. On pitched roofs, slates and tiles over a ventilated space can hide what’s below, so we also look from the loft where we can reach it safely. We survey pitched roof slopes, insulated roof spaces and loft conversions, and people most frequently book us about water that travels before it shows and cold areas below the roof.
Around Ferring, older homes can have thin loft insulation and later additions with roofs of their own. A thermal image can show where heat is escaping or where moisture may be trapped, and drone photos show the roof surfaces themselves. Anything that looks like moisture is checked with a meter. Calm, dry weather suits both methods, so the date is set with the forecast in mind.
The report doesn’t just list problems. It explains what we found, why it matters and what we recommend.
- Where
- Ferring (BN12)
- Region
- West Sussex
- Price
- From £400 inc. VAT
- Reports
- Emailed report with photos and recommendations
- Appointments
- Weekdays, Saturdays and Sundays
- Insured
- PI and public liability insurance
- Telephone
- 07833 053749
- Updated
- 27 October 2026
Rented homes, blocks and businesses
Freeholders and residents’ companies use a roof report to plan and budget, putting the urgent items at the top.
We survey roofs for landlords and agents as well as homeowners. The report gives you a dated record of the roof, with photographs, which helps you plan work between tenancies.
What a thermal roof survey does not cover
Our survey isn’t a RICS Level 2 or Level 3 survey, a structural engineer’s report or an asbestos survey. Other limits to bear in mind:
- Hidden layers that need to be opened up to check
- An energy rating for the building
- A structural engineer’s assessment
If in doubt, ring 07833 053749 or send us an email and we’ll point you to the right survey before you book. What our survey covers.
What this survey covers
- Flat roofs
- Loft conversions
- Commercial roofs
- Ceilings below the roof
- Insulated roof spaces
- Pitched roof slopes
What happens if roof problems are left?
A poorly insulated roof loses heat year after year. The camera can point to gaps and thin areas in the insulation, so improvements can go where they’re needed. Tradespeople may need to travel further to a smaller place like Ferring, so it helps to plan roof work rather than call someone out in a hurry. A survey gives you that notice.
Thermal roof survey starts from £400, including VAT. Basic starts from £150, Standard from £250 and Premium from £400, VAT included, and we can help you choose.
Why choose Independent Roof Survey in Ferring
- CAA-registered drone operator (Flyer ID and Operator ID)
- Professional indemnity and public liability insurance
- Thermal imaging and drones used where they help
- An independent view of the roof
See what a roof survey costs and what we found on two real jobs.
What a thermal roof survey looks like in Ferring
Ferring lies within about 1 mile of the sea, and coastal wind can be strong. Calm, dry conditions after a sunny day suit thermal imaging best, so the visit is planned around the forecast. About 1.6 miles north-west lies Ecclesden Manor, a reminder of how long the area around Ferring has been built on. Period homes nearby can have lead valleys, tall chimneys and a patchwork of past repairs, and the council can say whether a home is in a conservation area.
For site and facilities teams at buildings like Ferring CofE Primary School, big roofs are where close-up aerial shots and thermal images show the most at once. If you own one of the older houses in the streets near St Andrew's Church, thin or patchy insulation under an old roof often shows up clearly on a thermal image.
Ferring is about 2 miles south-west of Worthing, in West Sussex. We survey roofs in Ferring across London and South East England. Ferring is one of the towns and villages in West Sussex where we work. Brighton is in our area too.
Postcode districts we cover here for thermal roof surveys: BN12. Local streets include Pebble Lane, Ferringham Lane and Grange Park, and we cover them all. We also cover the places around Ferring: Kingston Gorse (1 mile south-west), Hangleton (1 mile north-west), West Kingston (1 mile west), Goring-by-Sea (1 mile east) and Angmering-on-Sea (1 mile west). Larger places within reach include Bognor Regis (10 miles west), Chichester (15 miles west), Littlehampton (4 miles west), Shoreham-by-Sea (8 miles east), Lancing (6 miles east) and Rustington (3 miles west).
Local landmarks in Ferring
Locally, jobs take us to homes and businesses close to Durrington Minature Railway and Chatsmore Catholic High School and the streets around them. The closest station to Ferring is Goring-By-Sea station, about 0.9 miles north-east. Well-known places in the area include Rustington Museum (2.4 miles west) and Old Castle (2.6 miles north-east). Open spaces near Ferring include Highdown Hill.
What we do, step by step
We work from the outside in: outside views come first, then the loft space if there is safe access. In total, it takes an hour or two at a house, including the thermal images, and around 3–4 hours for a commercial roof. Parking around Ferring is usually easier than in a town centre, but mention lanes, gates or long drives. Low roofs on bungalows can often be seen well from ground level, and the loft shows the rest.
- We go through the roof, the problem and the weather expected on the day.
- The roof is inspected visually from safe positions.
- We take thermal images of the roof and of the loft where we can reach it.
- Patterns that stand out are checked with moisture readings.
- The report pairs each thermal image with a photo and explains what it suggests.
Before we arrive
- Point out any leaks or damp patches
- Leave a clear route to the loft
- Gather any invoices or paperwork from past roof work
Arrange a survey
Prices start from £400, including VAT. The exact figure depends on the roof and the package, so ring 07833 053749 or send us an email with the details.
Advice
What affects the cost of thermal roof surveys
Our packages start from £150, inc. VAT. The price for your roof depends on:
- The package you choose: Basic, Standard or Premium
- The type of building, from a house to a block or an office
- Extra roofs, like extensions, dormers or garages
- The shape of the roof and its details
Prices start from £150, inc. VAT, for a Basic Survey. Standard is from £250 and Premium from £400. You’ll know the price for your roof before booking.
Getting in touch
A little information up front helps. Please include:
- The reason for the survey, such as buying, a leak or storm damage
- The style of property, from a terrace to a block
- Any stains, drips or damp patches you’ve seen indoors
- Any deadline, like an exchange date
Surveys can be booked for weekdays, Saturdays or Sundays. To arrange a day that suits you, ring 07833 053749 or send us an email.
Your questions about thermal roof surveys in Ferring
Do you carry out roof surveys in Ferring?
Yes. We work right across London and South East England, and Ferring is part of that. You can ring 07833 053749 or drop us an email with the address and some details, and we’ll talk through which survey suits.
How do I find out if my home in Ferring is listed?
You can check whether a building is listed on Historic England’s list, and your council can tell you if it is in a conservation area. If a home is listed, changes that affect its special interest need listed building consent, and in a conservation area re-roofing in different materials may need permission.
What’s in the report?
A written report with photos, explaining the condition of the roof, any defects and our recommendations, by urgency where it matters. Standard adds moisture detection and a structural check; Premium adds thermal imaging, drone inspection where applicable and structural analysis.
Are you structural engineers?
No. We’re experienced roof surveyors, and visible signs such as sagging are noted, but we do not provide calculations or an engineer’s opinion. If one is needed, the report says so.
Does someone need to be in?
Not necessarily. If we only need the outside, we can agree that beforehand, but the loft and any rooms with damp need someone to let us in.
What does a thermal roof survey show?
The images show how warm or cool each part of the surface is. Differences can suggest wet areas, missing insulation or heat loss, and we check them with moisture readings.
How quickly is the report sent?
The Premium Survey report comes the same day, the Standard within 24–48 hours and the Basic within 48 hours. All of them come by email.
Different roofs, different checks
Felt and asphalt flat roofs
Water under felt or asphalt can stay hidden for years. Thermal imaging helps suggest where it is, when the conditions allow.
Loft insulation
In the roof space, the camera can pick up gaps and thin areas of insulation. We look where there is safe access.