Isle of Wight · London and the South East
Thermal imaging roof survey in Shide, Isle of Wight
Not sure what state the roof is in? We carry out thermal roof surveys in Shide and across the Isle of Wight.
- Thin or uneven insulation in the roof
- Leaks far from where the stain appears
- Ceilings that feel colder in places
Thermal roof surveys for homes and businesses in Shide
A thermal survey can point to places where heat is escaping through the roof. Missing or slipped insulation and gaps at the eaves often show up as temperature differences. It works best when the building is heated and it is colder outside. The report shows the images and explains what they may mean. We do not give energy ratings or heat loss calculations. If you’ve noticed cold areas below the roof and moisture around outlets and upstands, we can find out what’s behind it, whatever the roof.
Around Shide, lots of roofs are low enough to see partly from the garden or the street. Chimney tops, valleys and rear slopes are where close-up or thermal images help most. Both depend on the weather on the day. Even so, a close-up image frequently shows wear on ridges and flashings that a view from the ground misses.
What you get is a clear record of the roof on the day we saw it. It is useful right away, and a good reference for later, such as when you want to compare after future work.
- Where
- Shide (PO30)
- Wider area
- Isle of Wight
- Price
- From £400 inc. VAT
- Your report
- A written report with photos, by email
- Appointments
- Weekdays and weekends
- Cover
- Professional indemnity and public liability
- Telephone
- 07833 053749
- Updated
- 27 October 2026
What happens if roof problems are left?
Without thermal imaging, the only way to see how far water has spread is often to open up the roof. That helps you and your roofer decide what really needs replacing. Around Shide, a leak in an older house can soak into timbers and plaster, which is far harder to put right than the roof fault itself.
Every price we give includes VAT. Thermal roof survey starts from £400, including VAT. We confirm the price for the job before booking.
What you get with us
- Thermal imaging and drones used where they help
- A sub-250g drone, flown with a CAA Flyer ID and Operator ID
- Over 20 years’ experience
- Insured for professional indemnity and public liability
Take a look at what a roof survey costs and two real surveys.
Roof by roof
Pitched slate and tile roofs
Even on pitched roofs, the camera can point to heat loss and some damp. We explain what can and can’t be read from them.
GRP fibreglass roofs
GRP roofs are laid over timber boards, so trapped moisture can affect the deck. The camera can help show where to look.
What we do, step by step
The aim of the visit is simple: to see as much of the roof as can safely be seen and record it clearly. Notes and photographs go into the written report. The visit normally takes an hour or two for most homes, plus time to check any thermal findings with moisture readings. A visit to Shide is planned like any other: the time, the access and where to park are agreed ahead of time. Visits can be on weekdays, Saturdays or Sundays. If there are outbuildings or garages you want looked at, mention them.
- We start with the roof, its history and any signs of damp or heat loss.
- We check the conditions and note how they may affect the images.
- We inspect the roof and take thermal images during the same visit.
- We back up the thermal patterns with moisture readings.
- You get the report the same day, with an in-person consultation to follow.
Preparing for the visit
- Agree roof access with the managing agent if it’s shared
- Buyers: confirm access with the estate agent or seller
- Make a note of anything you’d like us to look at
Arrange a survey
Our price is from £400, including VAT. What you pay depends on the roof’s size, access and the package, and you can ring 07833 053749 or email us to find out.
Read more
Common roof problems in Shide
On big commercial and residential flat roofs, thermal imaging helps owners plan. Patterns can point to wet areas and show which parts look sound, so moisture readings can be targeted.
Look out for signs like these:
- Areas of a flat roof that may hold water
- Water getting in at parapets and stacks
- Damp around roof outlets and upstands
- Missing or slipped insulation
For site and facilities teams at buildings like Nine Acres Primary School, a view from above covers a wide roof far faster than walking it.
What to check before booking
- How they’ll see the roof: from ground level, the loft, the roof or by drone
- How long they’ve been surveying roofs
- Their drone registration, if they fly one
- What’s outside the scope of the survey
What you can safely check yourself
Watch the gutters in a downpour, from a window or the ground. Water spilling over the edge can be a sign of a blockage or a gutter that has dropped.
A DIY look is useful, but it isn’t a survey. You won’t see flashings, valleys or the backs of chimneys properly from ground level.
Other services in Shide
Thermal roof surveys in Shide: local notes
Shide is within about 5 miles of the coast, and coastal wind can be strong. Thermal imaging works best after a sunny day, with a dry roof surface and little wind, so the date is chosen with the forecast in mind. A number of the island’s villages keep thatched roofs on older buildings, and the whole island is open to sea air and wind. Where a roof is steep, tall or hard to see from ground level, drone photos and thermal images add detail.
Hotels and guest houses near Shide can’t easily close rooms for a leak, so it is worth knowing the roof’s condition. Historic houses such as Carisbrooke Castle, about 1 mile west, show how far back building around Shide goes. For older roofs nearby, a look from the air or with a thermal camera is a hands-off way to check condition.
Shide is about 1 mile south-east of Newport, in the Isle of Wight. Houses, flats, blocks and commercial buildings in Shide can all book thermal roof surveys, with a written report and photographs every time. Across the Isle of Wight, we cover Shide and the places around it. Portsmouth is in our area too.
Surveys in PO30 are booked the same way as anywhere else. We offer thermal roof surveys to properties on Pan Lane, Ash Road and Dairy Lane and the roads around them. Being close to the A3020, Shide is simple for us to get to. Neighbouring places we cover for thermal roof surveys include Newport (1 mile north-west), Blackwater (1 mile south), Downend (2 miles east), Merstone (3 miles south-east) and Rookley (3 miles south). Within a short drive, we also cover Ryde (6 miles east), Cowes (5 miles north), Sandown (6 miles south-east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (4 miles north). Remote addresses need a little more planning, so tell us where you are as you book.
Local landmarks in Shide
Locally, jobs take us to homes and businesses close to Christ The King College, The Cranbourne Arms Public House and Island Innovation VI Form Campus, among other places. Other landmarks nearby include St Mary's Hospital (1.3 miles north) and Carisbrooke Castle (1 mile west). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
Your questions about thermal roof surveys in Shide
Is Shide within the area you cover?
We do. Villages and rural addresses get the same survey as a town house, with the route planned beforehand.
Does a conservation area affect roof work in Shide?
Start with Historic England’s list for listing and your council for conservation areas. Either can affect what roof work is allowed, so it is worth checking before planning any.
Will I get photos?
Yes. Photographs are taken throughout the survey, and they go into the written report alongside our recommendations.
What’s the best way to book?
The quickest way is to phone 07833 053749 or send us an email. Let us know the address and a little about the roof, and we will take it from there. We survey on any day of the week.
How soon will I get the report?
Each package has its own report time. Basic: within 48 hours. Standard: 24 to 48 hours. Premium: the same day. Mention any deadline when booking.
Do you carry out surveys on Saturdays and Sundays?
Surveys run seven days a week. To arrange a date, call 07833 053749 or email us.
What can thermal imaging tell me about my roof?
The camera records how the surface temperature varies. The patterns can suggest wet insulation, gaps in insulation or heat escaping. We check what it shows with moisture readings.
Practical tips
Over many surveys, some simple habits stand out:
- Ask us about the forecast if rain is expected
- Heat the home normally on the days before
- Keep the report to compare against after any repair
- Clear a path to the loft hatch before we arrive
If the images suggest moisture that can’t be confirmed, we’ll say what would help next, for example electronic leak detection or a roofer opening up a small section.
Watch for new damp patches on ceilings beneath the roof. Catching a leak early stops insulation getting soaked.