Buckinghamshire · London and the South East
Chimney Survey in Queens Park
Know where you stand with the chimney stack before you spend money on it. Chimney surveys in Queens Park.
- Pots or cowls that look unsafe
- Eroded joints in the brickwork
- Damp patches on chimney breasts
Chimney surveys for homes and businesses in Queens Park
Our survey covers the structure of the stack and its weathering details. It isn’t a flue inspection, a sweep or a gas safety check. If you use a fire or a gas appliance, the flue should be checked by a sweep or a Gas Safe registered engineer as appropriate. If something we see points to the flue, we will say so. If you’ve noticed staining on walls around the chimney and bricks with flaking faces, a survey will tell you what’s going on, on chimney pots and cowls, shared and party-wall stacks and chimney breasts alike.
Houses in smaller places like Queens Park can face open ground, where wind and driving rain hit the roof harder. Ridge tiles, verges, chimney stacks and flashings take the worst of it. A close look shows whether anything has started to loosen before it lets water in. A loose ridge tile or slate gives the wind something to catch, and others soon follow.
You receive the findings by email, ready to forward to whoever needs them. Basic reports come within 48 hours, Standard within 24–48 hours and Premium on the day.

- Location
- Queens Park (HP20, HP21, HP17)
- Region
- Buckinghamshire
- Price
- From £150 inc. VAT
- Your report
- A written report with photos, by email
- Appointments
- Weekdays and weekends
- Insured
- PI and public liability insurance
- Phone
- 07833 053749
- Last updated
- 27 October 2026
What affects the price in Queens Park
Every roof is different, so prices are confirmed before booking. This is what makes a difference:
- The size of the roof
- Commercial roofs and larger buildings
- Building height and the viewpoints available
- The use of thermal imaging or a drone
To find out what your survey will cost, phone 07833 053749 or drop us an email with the address and a few details. We will confirm the figure before booking.
What to let us know when you get in touch
The more you let us know, the easier it is to price the survey. When you contact us, let us know:
- Anything about access we should know
- What made you get in touch
- The kind of building and roof involved
- Where the property is, with the postcode
You can call us seven days a week, including Saturdays and Sundays. For a price or to book, phone 07833 053749 or send us an email.
Different roofs, different checks
Lead flashings
Mortar fillets are sometimes used where lead would typically be. They tend to crack, so we check them closely.
Rendered stacks
Water can get in through cracks and then struggle to dry out. We record any cracking and where it is.
Also near Queens Park
More services for Queens Park
Queens Park homes and their roofs
England has around 10,000 conservation areas and about 500,000 listed buildings. If your home is listed, changes that affect its special interest need listed building consent, and in a conservation area re-roofing in different materials may need permission, so the council is the place to ask. Some villages in Buckinghamshire still have thatched roofs. Across the South East, older homes tend to have slate or clay tiles, and many later ones concrete tiles. Each of these coverings has its own weak points, from fixings and valleys to flashings, chimneys and gutters.
For an older house near a landmark such as Holy Trinity, the nails, lead and mortar on the roof may be wearing out even where the slates or tiles look fine. Shop and office owners around Friars Square may find that a written record of the roof’s condition helps you plan maintenance rather than react to leaks. For site and facilities teams at buildings such as Aylesbury Grammar School, a written record of a large roof helps plan work for the holidays rather than in term time.
Queens Park is about 1 mile east of Aylesbury, in Buckinghamshire. Houses, flats, blocks and commercial buildings in Queens Park can all book chimney surveys. Queens Park is one of the places in Buckinghamshire where we work. You can also see our page for Milton Keynes.
All of HP20, HP21 and HP17 is within our area for chimney surveys. Streets in the area include Croft Road, Stoke Road and Anchor Lane, and we cover them all. Queens Park is on the A413, so it’s easy for us to get to. Neighbouring places we cover for chimney surveys include Walton (1 mile south-west), California (1 mile west), Aylesbury (1 mile west), Elmhurst (1 mile north) and New Zealand (1 mile north-west). We also work in nearby towns such as High Wycombe (13 miles south), Chesham (11 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Princes Risborough (6 miles south) and Haddenham (6 miles south-west).
What’s near Queens Park
Around Queens Park, our work takes us to homes and buildings near The Bricklayers Arms, Stocklake Park Community School and St Joseph's Catholic Infant School, among other places. The nearest railway station is Aylesbury station, about 0.5 miles west. Nearby you will also find Roald Dahl Children's Gallery (0.5 miles west) and Dinton Castle (3.9 miles west). Green spaces nearby include Coombe Hill.
When you need someone else
Some things can’t be seen without opening up the roof, and that sets some limits:
- Conditions inside walls
- Whether a gas appliance or its flue is safe
- A structural engineer’s assessment
If you are not sure which survey you need, ring 07833 053749 or use the contact form and we will give you a straight answer. What a survey covers and does not.
Roofs we survey in Queens Park
- Chimney pots and cowls
- Flaunching
- Chimney breasts
- Brick chimney stacks
- Lead flashings
- Shared and party-wall stacks
Leave it or get it looked at?
Most people never get a careful look at their chimney stacks. Problems often go unnoticed until damp appears inside. A survey gives you a clear picture before that happens. On a bungalow or cottage around Queens Park, the roof sits close to the rooms below, so water can show inside quickly once it gets past the covering. Finding the cause first saves a second job inside.
Bigger, taller and commercial roofs take more time to survey, so they’re priced to match. The price is confirmed before booking.
Why us?
- Over 20 years’ experience
- Prices that include VAT
- 98% of clients satisfied
- CAA-registered drone operator (Flyer ID and Operator ID)
What happens on the day
We work from the outside in: first the slopes, edges and gutters from every safe viewpoint, then the roof space where it can be reached. All told, expect between one and two hours for most homes, a little longer where there are several stacks. In a smaller place like Queens Park, as anywhere, the forecast plays a part: drone flights and thermal imaging need the right conditions, while a look from the ground and the loft can go ahead in most weather.
- We start with the details: how many stacks, whether any are shared and any signs of damp.
- The stacks are looked at from ground level, from windows and from other safe vantage points.
- We check and photograph the pots, cowls, flaunching, pointing and flashings.
- Where there’s safe access, we look at the stack in the loft and the chimney breasts for damp.
- You get a photo-illustrated written report and our recommendations.
Preparing for the visit
- Keep pets out of the way during the survey
- Unlock side gates and any roof access doors
- Agree roof access with the managing agent if it is shared
Arrange a survey
Chimney survey starts from £150, including VAT. What you pay depends on the roof’s size, access and the package, and you can call 07833 053749 or email us to find out.
Read more
Questions from Queens Park
Do you survey roofs for landlords with property near Aylesbury station?
Yes, rented property is part of what we cover. You can ring 07833 053749 or email us with the address and some details, including who will give access on the day.
How do I find out if my home in Queens Park is listed?
Historic England’s list shows listed buildings, and the local council can tell you about conservation areas. Listed building consent is needed for changes that affect a listed building’s special interest, and conservation areas can limit changes of roofing material.
What does a chimney survey cover?
The survey covers the pots and cowls, the flaunching, the pointing, the bricks and the flashings. Inside, we look for damp on chimney breasts and in the loft where there is safe access. You get a written report with photos.
Do you climb onto every roof?
Only where it’s safe to do so. We inspect everything that’s safely in view: from ground level, from windows, from inside the roof space, from the roof where it’s safe and by drone where it applies. Anything we can’t see is noted in the report.
Can you survey in bad weather?
It depends on the weather and the survey. In strong wind or a downpour, a drone can’t fly and access may not be safe, and we’d agree another day.
Do you use drones?
Where it helps and the rules allow, yes. We hold a CAA Flyer ID and Operator ID and fly a drone under 250g, and every flight depends on the airspace and the weather.
Should I worry about a leaning stack?
Have it checked rather than leaving it. Stacks can lean when mortar on one side breaks down. We record its condition with photos, and a structural engineer can assess whether it needs work.
Tips from our surveys
Some practical points come up on survey after survey. They apply to most roofs:
- Check that disused chimneys can still breathe
- Use the report as a baseline for future checks
- Note any damp on chimney breasts and when it appears
- Remove aerials or dishes from the stack if they’re no longer needed
If anything in the report is not clear, just ask us. The Standard Survey includes a follow-up consultation and the Premium Survey an in-person consultation.
Unused stacks should be capped in a way that still lets air through. That helps stop damp building up inside.